Tree shear

[Farming Forward]

Have been accepted for FETF grant item FETF14 the 300mm tree shear.

Any recommendations on which machine is best quality? Value for money?

Have been looking at the TMK and also the GEEL but don't seem to have found many people using one of these was looking for some feedback?

https://www.geel.at/en/felling-grab - £5000

https://tmkmachinery.com/tree-shears/tmk300/ -£5550

Thank you

 

[Tubbylew]

Tmk seem to be highly regarded by folk I've spoken to, would be my choice, although I haven't heard of the others. @wr.

 

[andybk]

go over to arbtalk https://arbtalk.co.uk/ be more answers there !

 

[CPF]

Got got ours from bucket warehouse Bletchley near Milton Keynes
If you do buy a share, , get a rotator with it.
What I like about ours you can take the blade off and use it as a grab as well.

 

[essex man]

Have been accepted for FETF grant item FETF14 the 300mm tree shear.

Any recommendations on which machine is best quality? Value for money?

Have been looking at the TMK and also the GEEL but don't seem to have found many people using one of these was looking for some feedback?

https://www.geel.at/en/felling-grab - £5000

https://tmkmachinery.com/tree-shears/tmk300/ -£5550

Thank you

Have a tmk 300 on our 8 tonner, very happy with it.
Nedd to make sure you get the correct ram on it to match hydraulics...bought from ncd equipment who were helpful with this.

 

[Will 1594]

what about mde koala 300
they say have two hitches one vertical one horizontal much stronger maybe bit more faf swopping

 

[Doing it for the kids]

I went through this process for a 7.5t machine a few years back, did a detailed post on here with a conclusion if it helps

 

[40 series]

MDE engineering