Trimble ezguide 250 to rds delta 34i

[ih1455xl]

does anyone know if you can wire the ezguide in to a delta 34i for forward speed

 

[Manney]

No dont think so. Think the delta 34i will only work with the Patchwork Blackbox gps systems.

I might be wrong though.

 

[Pheasant Surprise]

does anyone know if you can wire the ezguide in to a delta 34i for forward speed

How is it getting forward speed currently?

 

[PSQ]

I’ve done it with Ez Guide 500’s, 750’s and various versions of RDS 34i / PS8000 / Ceres control boxes. Currently using a 750 to provide forward speed on an RDS 34i in a sprayer.

Is the 250 able to export GPS data?

 

[ih1455xl]

I’ve done it with Ez Guide 500’s, 750’s and various versions of RDS 34i / PS8000 / Ceres control boxes. Currently using a 750 to provide forward speed on an RDS 34i in a sprayer.

Is the 250 able to export GPS data?

Did you make your own cable for that

 

[Slick]

I’ve done it with Ez Guide 500’s, 750’s and various versions of RDS 34i / PS8000 / Ceres control boxes. Currently using a 750 to provide forward speed on an RDS 34i in a sprayer.

Is the 250 able to export GPS data?

Yes the 250 can output nmea messages, it can also output simulated radar speed.

 

[Alistair Nelson]

Yes it exports a radar output use it with a KRM zurf spreader sometimes if going fixed rate.

 

[PSQ]

@Slick @Alistair Nelson simulated radar will work with the RDS 34i. Is it a 9 pin plug on the back of the 250?

 

[PSQ]

Did you make your own cable for that

I think it must have come from RDS, as it will have an aluminium angled ‘db9’ (?) type plug to fit (clip in) the rear of the 34i. I’ll have a look in the morning.

 

[Alistair Nelson]

@Slick @Alistair Nelson simulated radar will work with the RDS 34i. Is it a 9 pin plug on the back of the 250?

Yes it comes out of the deutcher connector on the back can’t remember which pin and then you can set it up in the screen to whatever pulses you want.

 

[Slick]

Pin 9 on the 12 pin Deutsch is radar output.

 

[Alistair Nelson]

Beat me too it checked mine today

 

[ih1455xl]

On your rds box which is it plugged in to the top or bottom plug?

I think it must have come from RDS, as it will have an aluminium angled ‘db9’ (?) type plug to fit (clip in) the rear of the 34i. I’ll have a look in the morning.

 

[PSQ]

On your rds box which is it plugged in to the top or bottom plug?

Top socket. The bottom socket is connected internally to the SD card slot on the front for variable rate application work, so in effect the bottom socket becomes redundant when working from a prescription on the SD card.
The 34i is a capable of a lot more than you might think.
Don’t forget if you’re exporting an NMEA message for GPS position to match your baud rate from the GPS to the RDS. I don’t think it matters what it’s set to, as long as both boxes match. I’m missing another setting: baud rate and ???
If you’re just using ‘simulated radar’ for a speed signal for the RDS then ignore the last paragraph.

 

[ih1455xl]

Top socket. The bottom socket is connected internally to the SD card slot on the front for variable rate application work, so in effect the bottom socket becomes redundant when working from a prescription on the SD card.
The 34i is a capable of a lot more than you might think.
Don’t forget if you’re exporting an NMEA message for GPS position to match your baud rate from the GPS to the RDS. I don’t think it matters what it’s set to, as long as both boxes match. I’m missing another setting: baud rate and ???
If you’re just using ‘simulated radar’ for a speed signal for the RDS then ignore the last paragraph.

Cheers I've brought a ezguide 500 and ezboom so just trying to wire it all in hoping I can get it to do varible rate liquid fert so top plug it I still then