Ts 100 sle

[Archer12]

Mate of mine has a ts 100 sle

She won't drive at all in high box in forward or reverse

Will drive in low box but no power and nearly moves

Steering working perfectly and pto

Lift isn't working

A mate put gauges on her but can't get pressure.
This light in picture is also on

 

[Archer12]

Any information wud be great

 

[Thepowerofdensil]

Take the side cover off the transmission, you will probably find the lube control valve has fallen out of the C3 C4 manifold.

 

[Archer12]

Take the side cover off the transmission, you will probably find the lube control valve has fallen out of the C3 C4 manifold.

Cheers for the reply would you have a picture od where that cover is il send it onto him cheers mate

 

[Thepowerofdensil]

R/h side of the transmission begins the battery
Quite obvious. Has the control valves for the transmission on.
Take it off and you should see it has 3 stack tubes on it

https://d1hu4133i4rt3z.cloudfront.net/attachments/898/898439-3939496eaded9250e29e00a4175513fe.jpg

 

[Archer12]

Cheers mate thanks a million for that much appreciated

 

[Archer12]

R/h side of the transmission begins the battery
Quite obvious. Has the control valves for the transmission on.
Take it off and you should see it has 3 stack tubes on it

https://d1hu4133i4rt3z.cloudfront.net/attachments/898/898439-3939496eaded9250e29e00a4175513fe.jpg

Would she still drive with that gone

 

[Jato]

No it won’t drive if that has blown out, the pressure light will only come on as clutch pedal released when this happens.

 

[Archer12]

No it won’t drive if that has blown out, the pressure light will only come on as clutch pedal released when this happens.

The light is on.. I've no hydraulics at all at the arms and no spools working.
Power steering fine and pto working fine.
She wouldn't drive all along only in low box very slowly.
Now she driving again in hi box and drive she drives away up the gears then when I stop to reverse she won't work try it again and she goes so I'm unsure where I'm at now with it

 

[Jato]

Lift would also be unaffected when in neutral.
What is being displayed in the digital display top window when you select through the gears?
This is where the trans status switches display what range is selected.
Yours is an SLE special, (manual draft control lift system),

 

[Archer12]

Lift would also be unaffected when in neutral.
What is being displayed in the digital display top window when you select through the gears?
This is where the trans status switches display what range is selected.
Yours is an SLE special, (manual draft control lift system),

The lift isnt working at all ive no hyrulic.this is what i have on the dash

 

[powerontheland]

Damper plate gone possibly

 

[Jato]

Damper plate gone possibly

Not if steering still works.
So to confirm fault :
Are there any warning lights on after starting and before selecting gears and lift etc.
Does warning light only come on when in gear and clutch up
Does warning light come on in every gear
Does it drive at all
Does it drive in certain gears
Do rear spools work and actually create pressure /. flow
Does rear lift arms work and actually lift weight
What is shown in the gear display window on dash when you select gears including high and low box

 

[Archer12]

Not if steering still works.
So to confirm fault :
Are there any warning lights on after starting and before selecting gears and lift etc.
Does warning light only come on when in gear and clutch up
Does warning light come on in every gear
Does it drive at all
Does it drive in certain gears
Do rear spools work and actually create pressure /. flow
Does rear lift arms work and actually lift weight
What is shown in the gear display window on dash when you select gears including high and low box

Ya that res transmission light on all the time..
It would only drive inflow box very slowly now power.
Left it for few days drives in hi box and goes threw all the gears then when I stop and put leaver into reverse it won't work then after a few minutes it will.
No spools working no pressure.

And lift arms aren't working either they are down at the lowest point and won't go up or anything..

Il have to check dash to see what it's reading il get a picture