Valtra SmartTouch camera connection

[farmer dave136]

anybody able to tell me how I connect a camera to the smarttouch screen please
Thanks

 

[Matt77]

I’d also like to do this, anyone done it yet?

 

[Pheasant Surprise]

Looks like it’s an M12 type screw-in terminal similar to a Fendt. You could buy an adapter cable or make your own.

https://ams-diffusion.fr/wp-content/uploads/2019/03/VICAM-AMS-VT-TRACTOR1_EN.pdf

Does your user manual give the pin outs?

 

[Matt77]

I’ve not got as far as looking at the manual, I googled about the camera and the OP came up, looks simple enough from what you’ve put up, thanks

 

[Pheasant Surprise]

This is the M12 camera pinout on a Fendt. A fairly good chance Valtra will use the same pinout on their M12 connector.

You should check VCC and ground are correct position using your multimeter. It doesn’t matter if the other pins are swapped around at the start. Just get the power pins correct off the bat.

M12 x 1 circular connector, 5-pin, A-coded (connecter has coding pins)

Max. Recommended power consumption is 5W per camera (socket)

1 (brown) = Video Signal (VIDx_Signal)
2 (white) = Vehicle earth (GND_Tractor)
3 (blue) = Stabilised 12V current supply (VCC_12V)
4 (black) = Power supply earth (GND)
5 (grey) = Reference potential, video signal (coaxial wire screen) (VIDx_GND)

Note: colours above refer to wire colours within 5-wire M12 cable on Dakota Micro AC-FDT01 adapter cable.

 

[Matt77]

Crikey, as soon as you put fendt in the search, the price goes up doesn’t it

 

[Matt77]

This is the M12 camera pinout on a Fendt. A fairly good chance Valtra will use the same pinout on their M12 connector.

You should check VCC and ground are correct position using your multimeter. It doesn’t matter if the other pins are swapped around at the start. Just get the power pins correct off the bat.

M12 x 1 circular connector, 5-pin, A-coded (connecter has coding pins)

Max. Recommended power consumption is 5W per camera (socket)

1 (brown) = Video Signal (VIDx_Signal)
2 (white) = Vehicle earth (GND_Tractor)
3 (blue) = Stabilised 12V current supply (VCC_12V)
4 (black) = Power supply earth (GND)
5 (grey) = Reference potential, video signal (coaxial wire screen) (VIDx_GND)

Note: colours above refer to wire colours within 5-wire M12 cable on Dakota Micro AC-FDT01 adapter cable.

Excellent, thank you.

 

[Pheasant Surprise]

Crikey, as soon as you put fendt in the search, the price goes up doesn’t it

I just buy my cables “no brand” and put my own connectors to suit whatever camera is needed.

Soldering iron or crimp tool and a steady hand is all you need.

 

[Matt77]

I just buy my cables “no brand” and put my own connectors to suit whatever camera is needed.

Soldering iron or crimp tool and a steady hand is all you need.

Just been on RS components, can’t find that m12 plug, being dumb I expect.

 

[Matt77]

I just buy my cables “no brand” and put my own connectors to suit whatever camera is needed.

Soldering iron or crimp tool and a steady hand is all you need.

Not sure what I put in first time but found them all now, thanks.

 

[grkmkale]

Not sure what I put in first time but found them all now, thanks.

hello did you make the cable can you send the schematic

 

[Will Blackburn]

Valtra Smart Touch Camera Adapter Cable | eBay

<p>Valtra Smart Touch Camera Adapter Cable</p><br /><p>Fits the new 5th generation tractors </p><br /><p>Cable approx. 1m in length, </p><br /><p>Adapter plugs into the 5 pin connector at the rear of the SmartTouch terminal </p><br /><p>For use with standard 4 pin cameras, see photos.</p><br...

www.ebay.co.uk

I've bought three of these for MFs, saves any faffing around.

 

[grkmkale]

Valtra Smart Touch Camera Adapter Cable | eBay

<p>Valtra Smart Touch Camera Adapter Cable</p><br /><p>Fits the new 5th generation tractors </p><br /><p>Cable approx. 1m in length, </p><br /><p>Adapter plugs into the 5 pin connector at the rear of the SmartTouch terminal </p><br /><p>For use with standard 4 pin cameras, see photos.</p><br...

www.ebay.co.uk

I've bought three of these for MFs, saves any faffing around.

i will make the cable myself

 

[Matt77]

hello did you make the cable can you send the schematic

Hi, no, I just brought some off eBay, they weren’t very expensive, couldn’t see the point in making my own in the end.

 

[grkmkale]

Merhaba, hayır, biraz önce eBay'den getirdim, çok pahalı değillerdi, sonunda kendiminkini yapmanın anlamını göremedim.

Anlıyorum Türkiye'de yaşıyorum 1 lira 18 türk lirası 35 lira büyük para o yüzden kendim yapacağım

 

[grkmkale]

I understand, I live in Turkey 1 pound 18 turkish liras, 35 pounds big money so I will do it myself

 

[Jop]

Does anyone know if you can add more than one camera to the smart touch screen? Looking to put a couple on the drill. Thanks

 

[Fendt516profi]

Does anyone know if you can add more than one camera to the smart touch screen? Looking to put a couple on the drill. Thanks

Massey Ferguson/ Valtra Twin Camera Selector And Display Adapter Cable **NEW** | eBay

Find many great new & used options and get the best deals for Massey Ferguson/ Valtra Twin Camera Selector And Display Adapter Cable **NEW** at the best online prices at eBay! Free delivery for many products.

www.ebay.co.uk

 

[Lofty1984]

Massey Ferguson/ Valtra Twin Camera Selector And Display Adapter Cable **NEW** | eBay

Find many great new & used options and get the best deals for Massey Ferguson/ Valtra Twin Camera Selector And Display Adapter Cable **NEW** at the best online prices at eBay! Free delivery for many products.

www.ebay.co.uk

Any experience of that?

 

[Fendt516profi]

No none (yet) the link to a single one is further up the thread, i looked on sellers other items and found that. Got two cameras on fusion