What a carry on

[colhonk]

Changed the traction belt on my combine today, half the berladdy combine to bits to get belt over bottom pulley

Remember doing this belt on a NH S1550 many years ago,was quite easy then.

 

[eagleye]

oh the joy of your own combine. we have only done 20 acres and already one set fans belts scrap

 

[nick...]

Changed the traction belt on my combine today, half the berladdy combine to bits to get belt over bottom pulley

Remember doing this belt on a NH S1550 many years ago,was quite easy then.

Fine decision to cover the sharp edges on guards.better than a cut open skull which would make you even more annoyed.
nick...

 

[Barleymow]

Fine decision to cover the sharp edges on guards.better than a cut open skull which would make you even more annoyed.
nick...

Might have been fitted after catching it

 

[Timbo]

Changed the traction belt on my combine today, half the berladdy combine to bits to get belt over bottom pulley

Remember doing this belt on a NH S1550 many years ago,was quite easy then.

Naaa the 1177 is ***much easier since on the Clayson you had to remove the very heavy variator pulley from its yoke to get the belts off / on, then go through a right faff adjusting the min / max stroke on the ram with spanners sizes only Satan keeps.

 

[Frankzy]

Naaa the 1177 is ***much easier since on the Clayson you had to remove the very heavy variator pulley from its yoke to get the belts off / on, then go through a right faff adjusting the min / max stroke on the ram with spanners sizes only Satan keeps.

Think something is very wrong if you need a 666 size spanner for that job

 

[colhonk]

Might have been fitted after catching it

Correct