Working out an area to concrete

[Gulli]

Yeah I was only been daft. Although I've done jobs where the whole yard is knackered and they just replace the really knackered bit in the middle

The bit next to it has been down longer than I've been alive. It's just a bit smoother than it used to be.
I'll probably crack it in half putting a gatepost in now I've said that...

 

[Robigus]

Having brain fade here today can anyone tell me how much concrete I need to cover this area 6 inches thick.
Measurements in metres. TiaView attachment 282704

As @Philip Watkins said there is not quite enough information to work it out correctly.
Are any of the corners right angles?
Or are any of the sides parallel?
Or can you tell us one of the diagonals?

 

[Gulli]

6m load went down this morning in gale force winds. Had a quick re measure and I'm left with this

 

[Lincs Lass]

There are some good concrete calculator sites ,I use the one from Cemex ,it has the option to put in weird shapes ,ive used it to work out for the garage base Im doing

 

[RWG Contracts]

Be about 7 cube

 

[Unbrako precast]

7.25 to be safe

 

[Gulli]

Yeah thats what I got
I'll order 8 and fill a bit more in

 

[Lincs Lass]

Extra cube will fill a decent size hole

 

[Gulli]

There's plenty of room for it, could do with another 30 cube give or take...

 

[Nearly]

Extra cube will fill a decent size hole

Or make one hell of a front end weight?

 

[Lincs Lass]

Or make one hell of a front end weight?

Ye ,2.4tn

 

[Nearly]

Ye ,2.4tn

a third to half of that would be plenty @Dave W

 

[Mark@mbb]

If you divide a m2 into slices you get 6.3 metres out of 1 metre at 150mm or 6"

 

[Bob c]

my pennys worth 12.96 cu

 

[Gulli]

It was 12.9 roughly dumped a bit in another place round the corner. Forgot to take a photo with the gates up before i moved them in, but heres one of a sheep struggling with a doorway...
Thanks for all the input folks