That was a stack of straw. 3 kids seen running away from it when it started. Police couldn't be bothered even to turn up!
View attachment 322868
As a student I worked on a farm next to a housing estate, Straw had to be baled directly behind combine, and bales picked up immediately, as we cleared the bales kids were entering the field to light them.
They also took pot shots at the diesel filters on tractors with air rifles, in an attempt to slow down the bale clearance
old prams and beds etc slowed down the combining operation also
a bit like this oneour sprayer decided to take a nap...
View attachment 324930 View attachment 324932 View attachment 324934 View attachment 324936
Flipping heck!!As a student I worked on a farm next to a housing estate, Straw had to be baled directly behind combine, and bales picked up immediately, as we cleared the bales kids were entering the field to light them.
They also took pot shots at the diesel filters on tractors with air rifles, in an attempt to slow down the bale clearance
old prams and beds etc slowed down the combining operation also
As a student I worked on a farm next to a housing estate, Straw had to be baled directly behind combine, and bales picked up immediately, as we cleared the bales kids were entering the field to light them.
They also took pot shots at the diesel filters on tractors with air rifles, in an attempt to slow down the bale clearance
old prams and beds etc slowed down the combining operation also
Good god !Not your normal kind of wreckers, but ag related non the less.
There was a FLT driver buried under this Cheese warehouse shelving collapse yesterday, he was found alive and well, his FLT cage had protected him from the collapse.
View attachment 325466 View attachment 325468
Credit: Shropshire Star
Quite a few videos of racking collapsing when hit by forklifts, Youd think helth and safety would insist its bolted to roof as well as floor to give some structural strengthI don't understand how Health and safety allow this sort light warehouse shelving, all it takes is one wrong move with a forklift, and you get the above result.
IMO it should be made out of 5mm box or even H beams.