Zetor button beside starter button?

[Tractorman52]

I’ve noticed on my 6211 there’s a button beside the starter button that isn’t on other models. Any idea what this may be? Perhaps a cold start button?

 

[Netherfield]

Don't touch it.

 

[DrDunc]

Self destruct

You have 5 seconds to exit this vehicle......

 

[organic antares]

Cold start is on injector pump on our 6718, don't know what yours is

 

[Wellytrack]

Oh! You have the rare GTI model.

It will cock it's leg and lift a wheel cornering if you get it just so..

 

[melted welly]

I’ve noticed on my 6211 there’s a button beside the starter button that isn’t on other models. Any idea what this may be? Perhaps a cold start button?

Dare you to press them both at the same time

 

[simon-0116]

Cold start I think was, open throttle press button on fuel pump. On 7011 era.

 

[livestock 1]

Ejector seat button.

 

[vantage]

I’ve noticed on my 6211 there’s a button beside the starter button that isn’t on other models. Any idea what this may be? Perhaps a cold start button?

It turns on the seat massaging!!

 

[agrimax]

I see no mention of it in here....

http://www.cals.cz/zetorservice/files/1/UR%20I%205211-7745%20FR.pdf

 

[J 1177]

Power boost. Push it and hold on for dear life.

 

[Badshot]

Age of tractor?
Ether button?
Old JD had them.
Seeing as zetor aimed at cold climates I expect they offer it too.

 

[davidroberts30]

Age of tractor?
Ether button?
Old JD had them.
Seeing as zetor aimed at cold climates I expect they offer it too.

I've never known a zetor not to start in colder weather

 

[serf]

Does anyone else find they run hot and prone to overheat when worked or is it just mine, is it because they have different rads that are made for colder climes ?

 

[Rod Dumbreck]

Does anyone else find they run hot and prone to overheat when worked or is it just mine, is it because they have different rads that are made for colder climes ?

Some had a radiator blind to pull down (actually maybe up) to shut the air flow off

 

[serf]

Oh , will have a look , not noticed anything obvious , was this on earlier models , I have 7000 series (94)

 

[agrimax]

Does anyone else find they run hot and prone to overheat when worked or is it just mine, is it because they have different rads that are made for colder climes ?

The two I had got hot when worked. (4712 and 7045). Fine after cleaning the radiators.You may think the radiator is clean but it needs removed to clean it properly both inside and out.

 

[serf]

The two I had got hot when worked. (4712 and 7045). Fine after cleaning the radiators.You may think the radiator is clean but it needs removed to clean it properly both inside and out.

This is 7340 , have had rad out and there was crud all in bottom , so it may still be bunged up a bit still and crap in water galleries prob , I keep flushing it through , but still not quite right

 

[Chae1]

@zetnige