Mower bed repair
- Thread starter Rsh6150R
- Start date
michael N123
Member
Trade it in
livestock 1
Member
They aren’t the toughest get rid
Dave W
Member
- Location
- chesterfield
And don't tell the dealer?
Dave W
Member
- Location
- chesterfield
1/2" isn't going to affect the drivetrain of the bed. Keep checking the oil regularly. If it starts to show any hint of glitter in it then so using it.
best way to straighten is a piece of timber over top of bed and a bottle Jack onto chassis above
And hope the dealer is blind.
Thanks it runs smooth still hence why I want to straighten this I’d had a mess about with a bottle jack but didn’t have much luck more than likely wasn’t going far enough with it just wondered if there was a better way to do it
michael N123
Member
Leave it overnight I've done kuhn beds in the past like that
Pistonbroke
Member
How did you even notice it had bowed that amount? They probably flex as much while working
You can see it when’s on concrete there middle skids arnt touching the floor by 1/2 an inch or more
- Location
- The North
I would leave it sounds like f**k all
- Location
- SW Scotland
It'll probably pull down flat when it's working, especially in a heavy crop.
Expanded and improved Sustainable Farming Incentive offer for farmers published
Expanded Sustainable Farming Incentive offer from July will give the sector a clear path forward and boost farm business resilience.
From: Department for Environment, Food & Rural Affairs and The Rt Hon Sir Mark Spencer MP Published21 May 2024
Full details of the expanded and improved Sustainable Farming Incentive (SFI) offer available to farmers from July have been published by the...
From: Department for Environment, Food & Rural Affairs and The Rt Hon Sir Mark Spencer MP Published21 May 2024
Full details of the expanded and improved Sustainable Farming Incentive (SFI) offer available to farmers from July have been published by the...