I’ve a t7 230 and im
Wondering is it possible to set it up so we can lift the front mower and back mower with the joystick or with two of the electric spools. At the moment we lift front mower with joystick and rear mower with spool switch
Anybody here with one or a jd 328 could help me? Pressure on gauge won’t stay on 82 bar when I set it in working position. After a few times up and down field and lifting at headlands it goes up to 95-100 bar or sometimes down below 70bar. Can’t get a even cut like this. Changed tap too incase...
I have a Taarup 306 mower which needs a couple of bearings in the bed. Ive managed to identify the bearings which sit between the rotas but the bearing nearest the gearbox which sits in the bolted on housing im struggling with. does anyone know where i can source one from? thanks
Kuhn GMD 310 F
Advert added by: B and B Tractors
Machinery Details
Category: Mowers Disc Mower Price: £ Condition: Used
Description
Kuhn GMD310F-FF
Mower Front Mower
Immaculate Condition
How to make contact with the Dealer
Click here to read more about this listing...
Anyone got a part no. Or what type of shaft there is on a Krone 32cv front mower, ours has been "borrowed" and now can't be found ! Parts book doesn't give the complete shaft just the different bits !
Hi All,
The breaker (Rushton) I've used before is out of stock on these, any other options?
Mower is high mileage and I only have 80 odd acres to cut, so its not worth new ones.
TIA
Anyone know what these go to or where I can go to find out? everywhere says they cant help me or need part #'s.
Limited down to Comer t-304a's gear reducers and gear increasers, some have same shafts some have different, 6 spline vs straight shaft vs 19 spline etc.
Any help would be greatly...
I’ve just bought a jd 131 front mower and I noticed where the frame bolts to the mower it can be bolted in two different places mine is bolted at the rear holes but if was to move it to front holes it would be 6” nearer the tractor. Is there any reason why I can’t?
Had the 1st day out with the wagon yesterday (Pottinger Europrofi) and whilst I'm pleased with it the chop quality wasn't the best, even with brand new blades in and was difficult to clamp.
We did row 3 into 1 straight out of mower swath and are just wondering if the centre swath which hasn't...
Written by Justin Roberts from Agriland
It was back in March that Krone and Lemken announced to the world that they had been working together on what amounts to a new tractor, known as Combined Powers.
The difference between their unit and the products from other manufacturers is that it is...
Hi,
I have been rebulding a worn out MF675, rebuilding to cab, the front wheel drive, clutch and more or less everything on the external side of it.
Yday was the big day and I was going to use it to drill some holes for poles, but then i discover that the PTO won't stop when the engine is...
Hello,
I am hoping that you might be able to help with with diagnosing what might be wrong with the transmission on my 2018 Countax B60-4WD mower. I am experiencing a loss of power that gets worse as the system gets up to normal operating temperature. I have noticed that this is only really...
I’m sorry if this comes across as moaning but I am abit down at moment with one thing and another and this is getting to me badly this evening. Since 1st March Iv lost 5 ewes to identical symptoms and now Iv found a 6th one this evening. Symptoms are, very very wet dribbly mouth. Either no...
NOW LIVE!!
THE DISPERSAL SALE OF 9 TRACTORS, SKID STEER, QUAD BIKE, TRAILERS, FARM MACHINERY, LIVESTOCK & GENERAL EQUIPMENT
On behalf of Mr P Chisholm (the auctioneers having sold the farm)
TO BE SOLD BY ONLINE TIMED AUCTION
RUNNING FROM: MONDAY 16TH MAY UNTIL TUESDAY 24TH MAY 2022...
We have a few krone mowers, we bought this 10'6'' trailed mower new, in 2015, it has done a fair few acres but the triples have taken over most of the work the past few years.
Long story short, when changing a module bearing we noticed play in the back idler gear so we took out all the...