• Welcome to The Farming Forum!

    As part of this update, we have made a change to the login and registration process. If you are experiences any problems, please email [email protected] with the details so we can resolve any issues.

Recent content by chester

  1. chester

    Mouldboard ID on Lemken plough

    Pictures below
  2. chester

    Mouldboard ID on Lemken plough

    Would like to know what sort of mouldboards are in this plough and could I sensibly use 650’s with it please?
  3. chester

    Do you know this plough?

    Interested in this plough to go on a Fendt 516. Looks like Crummack bought it at a sale, judging by the sale sticker. I’m in Somerset so Yorkshire is a long trip to go and look at it. If anyone one has any intel on it it would be appreciated. I’ve been in the hunt for a five furrow Lemken Vari...
  4. chester

    OSR drilling

    15mm forcast here in Somerset for Sat morning, debating whether this would be enough given how dry the soil is and the forecast hot and dry post Saturday. Twist or Stick? How do Oats compare GM wise?
  5. chester

    Nh cx5080 hand brake adjustment

    Have tightened the cable up in the cab, is there any where else I can adjust it up please?
  6. chester

    Harvest '24 hold-up ?

    #Two Tone
  7. chester

    JD 6400 ventilation diverter jammed.

    Anyone with any suggestions please? Before I go and buy a fan to stick in the cab
  8. chester

    JD 6400 ventilation diverter jammed.

    Would just like to know if I can leaver up the diverter flap so we can get some air on our face. Happy for it to stay there for the remainder.
  9. chester

    JD 6400 ventilation diverter jammed.

    The flap and or cable seems to be jammed and all the air is coming out at your feet. The white plastic under the knob that you use to adjust the flow with is all broken off so you can’t use the knob. Is there a way of getting to the flap so I could adjust it manually?
  10. chester

    How to get a driving test appointment.

    My son has taken his test once and failed it and is trying to get another test but is struggling to. He’s tried using apps and getting up early on Monday morning but has not had any luck. We have also applied for a tractor test but have heard nothing. It would be really helpful if he past his...
  11. chester

    Who to approach re wind farm

    Quite a way down the solar route, but would mean loosing ninety percent of the farm to it. Battery storage seems a non starter due to infrastructure, so was thinking about a wind farm given the new Labour government seems to have given on shore turbines the green light. The obvious person to ask...
  12. chester

    Concrete floor dusting

    Grain store concrete is crumbling and dusty when swept. What’s the best thing to use to stop it? Also have a patch where the floor does not have a dpc, is there anything I can put on top of the concrete to act as a dpc?
  13. chester

    Fendt 516 profi plus speed input

    Spoke to dealer and the problem was I wasn’t using the clutch to stop. Did try this and it’s worked. So the speed over 100m is correct but it still measures 107m on the area meter, which I presume is using the gearbox. Interestingly I put in the correct circumference for the wheels and when I...
  14. chester

    Peat restoration grant help.

    Interested in doing the peat restoration grant under CS SW17 but it looks quit complex and could do with some advice and help. Can you recommend anyone who would have experience with this and could help me with my application please?
  15. chester

    Fendt 516 profi plus speed input

    I tried changing the rolling circumference and yes it changes the speed of the gearbox reading. When I calibrated the radar it seems to reset this figure as I suppose it recalculates what it should be. I thought I could make it read the correct speed by altering the calibration constants but it...
Back
Top