How did you get on with fitting the kit to the t7.250. Was wandering if anyone had the new holland part no for the complete kit that yellowfrog fitted? Looking to do something similar with at t7.235 and FM750
When I'm side on coming up to my next AB line and select it sometime it engages and tries to drive towards the hedge instead of infield. Even if I'm pointing more towards the inside of the field it still does it sometimes?
I've done work in a field and the coverage is painted, when I go back to do another job in that same field how do I delete the last coverage?
There is a setting for Bar Distance in Toolbox > Implement that will allow this. You need to have Medium Tractor software V30.11 or higher on your display to see this though.How do I set the coverage so its logging from behind the fertilizer spinner and not in the middle of the tractor?
Can anyone give me a rough run down of what the settings and calibrations do so I can start fine tuning it?
another book turned up today gareth. this one might be better than other. intelliveiw 4 plm intellisteer auto steering system .plm intellisteer all makes. plm row guide . all thecallibration for nav controller and stuff . part no 47428912
If you go to Toolbox > GPS which correction source do you have selected?
Select WAAS/EGNOS. This is a free signal. After you select it you should have DGPS after 5 minutes with the tractor parked outside.
If you go to Toolbox > GPS which correction source do you have selected?
Select WAAS/EGNOS. This is a free signal. After you select it you should have DGPS after 5 minutes with the tractor parked outside.
Is it possible to switch the GPS off when not in use? If I'm on the trailers or something it's still recording and taking up memory plus it beeps when you loose signal and that soon gets annoying!