Does any one know where I could get some parts for a gp2.30 baler, or what are the other makes of the same baler under a different name such as vicon
Deutz fahr GP2.30 round baler
- Thread starter Mike26580
- Start date
- Location
- Ardrossan Ayrshire
Vicon rf120 iirc
Wellytrack
Member
Getting on in years those now. Must be 25 years since they made them..
Boohoo
Member
- Location
- Newtownabbey
Spare parts manual is on the Kverneland website https://www.kvgportal.com/publicquest/post/671190?brand=KvernelandGroup
Boohoo
Member
- Location
- Newtownabbey
MP130 was available 25 years ago, could be nearer 30 since the GP2.30 was new
Thanks everyone, doing one of them up for my project in college
Cowabunga
Member
- Location
- Ceredigion,Wales
I seem to remember my GP2.30 with twin tie and wrap being here in the mid 1980’s, so 40 years ago. It is a wonder that any are still in working order. More of a chance if they were used exclusively for hay and straw with no silage work. With net wrap, this is almost a one-man baler as it needs a lot of understanding. There’s almost a knack to keeping it working consistently. In best conditions it is capable of making 60 bales an hour though.
- Location
- Ardrossan Ayrshire
It turned the bale quickly, so netted quick, straightforward as long as you adjusted the tension on the net roll cover as the roll reduced in size. But yes, 60 good bales a hour quite possible.
Welsh hill boy
Member
What parts are you looking for? pretty sure I’ve got some various springs for one of those still here
Had a 120 and 130,I wouldnt entertain having a 120 at any price.
Not fully sure what I need yet, starting tomorrow, I know I’m trying to convert it into a net baler so looking for that whole system but after tomorrow I’ll know what else I need
Cowabunga
Member
- Location
- Ceredigion,Wales
Oh dear! I wouldn’t even consider converting one to a net baler. It is an exceedingly complex conversion and the setting of the straight knife and anvil and all the linkages involved in everything will be a total nightmare. Honestly, your time would be far better spent doing something productive than doing something that will likely drive you mad and not work even after you are confined to the looney bin.
Just my opinion. Try and see whether I’m right and do report back either way.
Hi everyone, just wondering would any one have a clue where I could get some sprockets for the baler.
- Location
- Ardrossan Ayrshire
Woodfields?
sc4545
Member
- Location
- kinnegad ireland
Kuhn dealer