I’ve got a Deutz 4/50 with an 8 spline PTO shaft (think it was originally sold to the East European market ?) . Does anyone know where I might buy an 8 spline female to 6 spline (standard 6 spline) adaptor ?
8 spline PTO ?
- Thread starter Happyharry
- Start date
Many thanks. That looks like a 6 spline male to me ? I need a 6 spline female to 8 spline male
My apologies. Got that wrong. I need an 8 spline female to 6 spline male adaptor
Northern farmer
Member
- Location
- North
For heavy, permanent use I would consider changing the PTO shaft. At least for many other tractor brands pretty simple to swap and not very expensive.
Mmmm…… just had a look on some other thread (on this forum) about changing/replacing a PTO shaft. Nearly all mention clutch out, etc., admittedly not specific to a Deutz.
ollandroverman
Member
- Location
- nr Kendal (The Lake District)
DX 4,10 - 4,30 - 4,50 - 4,70 6,05 - 6,10 - 6,30 - 6,50 (After n° 3000)
DX 4,10 - 4,30 - 4,50 - 4,70 6,05 - 6,10 - 6,30 - 6,50 (After n° 3000)
officinapeletti.com
Generally held in with a snap ring,literally a couple of minutes to swap using some pliers.
Last edited:
Many thanks. That looks encouragingLooks like a very easy swap to a new shaft.DX 4,10 - 4,30 - 4,50 - 4,70 6,05 - 6,10 - 6,30 - 6,50 (After n° 3000)
DX 4,10 - 4,30 - 4,50 - 4,70 6,05 - 6,10 - 6,30 - 6,50 (After n° 3000)
Thank you
Be nice to think it was that easy. I'll start a new thread asking if anyone has actually changed the PTO shaft on a Deutz in order to try and get some first hand feedback. Cheers
glasshouse
Member
- Location
- lothians
Buy the correct one
Thanks for the link but they don't do an 8 spline female
Happy hillbily
Member
- Location
- Uwchaled, North Wales
A quick Google shows only AliExpress that sells an 8 to six spline adapter.
Better off if possible to swap the shaft on the tractor.
put a picture up of your current pto stub,it will be obvious if it has a snap ring.
And another…
)
yes, not sure I want to go down the Chinese route so am exploring a replacement output shaft on the tractor
Happy hillbily
Member
- Location
- Uwchaled, North Wales
Yes it will be job done once job done. Also will probably increase the value of the tractor somewhat.
I never knew there was an 8 spline available
Oliveau
Member
- Location
- Indre et Loire, France
Why not undo those 4 Allen head bolts and see if the PTO stub will withdraw ? Park the tractor nose down hill in case oil runs out.