Search results

Thanks GTE,local dealer sorted it out the previous owner had a antibiotic group which were not to be milked in the system, simple to rectify,if you knew how, Delaval need to improve there IT backup.

Got a 2nd hand alpro as Delaval wouldn't fix my old one ,working well except for my low yielders the cluster won't drop and I have to press the down button to get vacuum, presume it's the setting in the alpro to warn for low yields which is set too low these girls are doing 16 l any one know...

How are the 320s on silage pit, I pick up 400 acres just for myself over a year , but the pits are fairly steep, anyone with experience? Grading up from a 414.

Yes he said tylosin but not clearing it up

Getting terrible mastitis which is not curing up have used synulox and terrixine tubes .betamox ,engermcin and tyylosin injections, tylosin cured a few of them, sensitivity test said CNS was problem I am pre and post dipping, really at my wits end tuned 6 cows this morn, any hel greatly appreciated.

Handbrake is stuck on my disco 3, I pulled the hanbrake overide loop which is under the console but it is not freeing the handbrake , any ideas where i go next ? help!!

I realise its a bit of a risk putting in a second hand one but getting quoted crazy money for reconditioned units.

No its zf thanks for offer anyways.

YES, is it easier to take out the engine to get it off , iwas just going to swap it with a second hand one.

Any jcb experts out there , earth calling mars

hi, my jcb 414 blew the seal on filter three times and I retightened it ,each time but now I have no forward or reverse, and there is a hissing noise from front of loader .Is pump knackered ? can I just swap it for a reconditioned one if it is? Is it difficult ? Have 100 acres of silage to purt...

Girls came in at one oclock today and wont be going out again for a few days just belting down all day , in sunny south east of Ireland ,cant remember having to house cows before in may and been at nearly 30 years

It was the orbital unit mechanic says it was worn and no grip on steering shaft so .new one going in.Dont think steering shaft is too hot either but think it will be ok

Just tried holding a third service but no change in the steering.

i didnt do much inve I that tomorrow Vinnie.

No pipe went lately , excuse my ignorance but how do you mean hold third service in pump?

have a old jcd 414, loader is working perfect up, down tilt etc but i have no steering anyone have any experience ?

Give her a shot of meta cam every 3 days if she has a hurt it will kill the pain.. is she long calved,? If not a bottle of calcium and magnesium won't be any harm.

Any ideas for teating black spotscab on end of teat on cow?