Search results

Does anyone know what is the best way to shine boards of a plough so that the clay doesnt stick , i bought a plough and at the end of every run i scraped the boards but it still sticks

Hi all , i have a battioni 11000 ltr pump that i put new vane in but it is still not performing the way it should , i noticed it is ridged inside and im wondering did anyone ever get a pump honed out and was it sucessful tia

Hi im wondering did anyone ever get an orbital unit on a newholland t6 or t7 repaired steering gets v giddy when tractor gets warm

Hi

Hi all,would anyone be able to tell me what kind of air pressure and volume I would need to blow out 1300 MTRS of 4 inch pipes I would say not too thick but as we all know it's generally thick finishing up

Hi all ,I'm wondering is it possible to buy a baler that will bale 5 by 4 bales of hay or straw and 4 by 4 bales of chopped silage afaik there is a krone but I'm not a fan of the chain and slat would a belt baler handle silage in typical irish weather

Hi all I'm wondering does anyone use a tubeline wrapper to wrap their silage if so is there big savings to be made

Hi I'm looking at a triaxle 5000gl slurry tank and I'm wondering what size tractor I would need to pull it I'm not in hilly country and the biggest tractor I have ATM is a tm 190 mapped but I think it would be sluggish and our next wagon will prob be a triaxle so the tractor would have to be big...

Hi ,I have a man looking to put a db on a tanker with a hyd pump and I was wondering would it work it's an mxm case 190 with cl c hydraulics

Hi I have a 2640 and I can't get oil up to the clutch master cylinder also the steering is sticky as if it's drawing air any help appreciated

hi all ,i have just aquired a mf 2640 which needs work and im wondering are they a collectors tractor ,if they were i wouldn mind restoring it ,while im here i also have a mf 178 and im asking the same question both tractors need a bit of work ,all replies would be appreciated

Hi ,I have an 895 stockman with a very rusty L cab and I was wondering is it possible to put an XL cab on it

hi ,my bunning 105 needs a new set of floor chains and i was wondering do i buy chain and weld on plates or do i go back to bunning and buy them ready made at i think 2500 euro

Hi,I'm having bother with a TM 190 going back to 7th gear every time you change gear and esp if you go from forward to reverse no error codes only CP ,we have changed both clutch switches ,any help or ideas would be appreciated

hi,im just wondering what is the best 4 row tedder fo tedding out heavy ten ft silage swards ,a sh one and 4000 of a budget and about 200 acres max over ten weeks 30 acres per day will be the max we will need its just a few of our customers have asked

Hi ,I have bought a tm 190 and it seems dead compared to my 8560(205 hp on Dyno) can it be remapped or chipped or did anyone put a manual injector pump on one ,my son says the boost does come on when it's in the high gears under load ,I really miss that there is nowhere to put a 13 and 6 spanner

Anyone here know why some reardischarge dung spreaders use four floor chains instead of two and which is better ,

Hi all I'm wondering does anyone here have a manual or diagram showing the hi lo control unit of a fiat 94 series ,one for the later l or 35 series will do either ,the tractor won't drive in high or low ,any replies would be gladly appreciated thanks

Hi I'm wondering can anyone throw s bit of light on my brake problem ,I have an f 115 and the left hand brake pedal is going to the floor I have tried everything master cylinders are good I put new seals in and the piston is good but it's still losing fluid any help would be gladly...

Hello ,I'm wondering are there any case IH experts on here ,my problem it the hydraulics are gone extremely slow but the steering is still good ,i changed the filter ,i changed the sandwich gasket i checked the divider valve and i also took the pump apart and checked it,any help would be appreciated