We bought a ford 5030 synchro shuttle recently and when taking it home. after driving about 5km it suddenly locked up and stalled while driving at High 4 (nearly putting me through the window). It started back up but it wouldnt drive when in gear. When letting off clutch it labours engine until...
Hi all, I’m looking for a bit of advice / help with a tractor I’ve bought recently.
I’ve got a 2005 jd 6920s that’s got a few issues…
There is a bit of a whine when at full speed / under load on the road.
sounds similar to 4wd drive being engaged but it isn’t that as you can clearly hear a...
I own Massey Ferguson 4455 and lately I have noticed that the oil from hydraulic reservoir is somewhere drained direct to the gearbox, it doesn’t leak to the ground. Those systems should be separated, but any guess where are they connected together? What could be broken?
hi there, I’m new to this forum stuff so hope this makes sense and it in the right area of forums! But anyway got a 6910 and well like the title says got a problem with it shifting down the powrquad gears! It’s a electric shift version with the stepper motor on the side of the box, when I first...
Hello everyone!
Im doing a rebuild of my matbro TR250 4speed manual shuttle transmission. I got the matbro workshop manual (with terrible printquality im sorry to say) and a JCB transmission workshop manual covering from SS500 up to SS750 transmission models. Unfortunately none of the gearboxes...
Ive got a MF 3080 autotronic that wont go into 4th gear, i fixed the issue with the nut at the front of the gearbox a few months ago and completly stripped out the gear box replaced a cog that had stripped teeth and put it all back together, A and B range aswell as 1,2,3 all work perfectly but...
Good Afternoon,
I currently own a Wolseley Swipe Jungle Buster (SW0739) and I am after a seconf hand or 'Spares and repairs' Gearbox, can anybody help? I have also attached a drawing to help.
I have chance of a 2cx at the right money but it has a gearbox fault. As soon as you start the engine it wants to go in reverse. Moving the shuttle lever forwards or backwards makes no difference it is also dropping oil onto the floor. Does anyone have any ideas what the problem with it might...
helping a local farmer with an issue on their tractor
Intermintant fault where the tractor will not start , have got it to go by turning on the auto trans button.
I suspect it could be the pedal potentiometer , or the neutral switch in the gearbox.
Any body have any experience like this , or any...
The bevel gearbox on our old JF muckranger 90 has given up
Does anyone know where there's a spare one lying around or another make that would do? I'm willing to adapt the machine. It's a 1:1 ratio.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.