Hello everybody.
I've just bought a Arion 540 year 2008, after using it for a few hours I've noticed that it rolls a little bit sluggish. like when I stop in a slight uphill it would start to roll backwards but just a few cm and then stop. At first I thought that it was because of the 4wd being...
Hi, just became the owner of a 2013 mf 7620 dyna vt. My experience of cvt's before are they're fully controllable from the joystick. This seems to require you to adjust the revs manually using the hand throttle. Am I missing something or is this the correct procedure for this tractor?
Thanks
‘They’re drowning us in regulations’: how Europe’s furious farmers took on Brussels and won
Written by Jon Henley in Paris and Sam Jones in Pamplona from the Guardian
Mass demonstrations across the EU against environmental directives have become a politically charged issue
On the outskirts of...
Written by CPM Magazine from CPM Magazine
Download PDF
One way to brighten up the dreary month of January, as it turns out, is to be surrounded by endless amounts of shiny new machinery, something LAMMA 24 had in abundance. CPM reports on some of the latest launches and UK debuts from the...
Need a new fan belt on the TM.
On our one TM it's a doddle but on the other one there is the front pto shaft to negotiate.
Am I right in thinking I need to undo the 4 bolts on the pulley and slide the female coupler up over the male spline?
There are also 2 threaded holes. Are they there to...
Who's going then?
It's virtually on my doorstep, fields are clart & puddle, and I've had enough cabin fever, so I'll be there.
Looking at everything, but particularly poor man's auto steer and fert spinners
Be good to catch up and put face to a few TFFers
Written by Justin Roberts from Agriland
Amongst the avalanche of news emerging from Agritechnica last autumn, upgrades to AGCO’s own top end Ideal combine range went unnoticed, yet the machines did receive significant attention.
Also benefitting from improvements were the Activa and Beta...
Hello,
Just asking about a large yellow ‘fuse’ that controls the cab suspension system.
I needed to remove this to stop the compressor draining air from the suspension cylinders. The cylinders are now pumped to about 40psi and seem to be holding up fine after removing this ‘fuse’.
My question...
Right, @KB6930 warned me about this!🤦🤣
Having trouble keeping the front wheels on the ground when I lift plough. Got a stone fork on front with 3 sets weights hanging off it and on steep bits at ends the front wheels are still wanting to lift. It's fine in flat fields.
Fendt mechanic today...
As per the thread title really. We are looking to potentially change our plough and these seem to be incredibly good value. We are not doing a huge acreage as we mainly mintill. We have good forgiving soil but plenty of slopes as we are in Cornwall.
Many thanks.
Matt
My father was doing up a Massey 135 and removed all the wires from the light switch. Would anyone know what wires go where on this switch to make it work?
Thanks
Hedge cutters so you don't have to turn your neck so much?
I just wanted to know your thoughts on these?
Sorry, I don't know the proper name for this type of hedge cutters?
I would say that if your using a 100hp tractor it would make it quite unstable? Do I stand corrected?
Just looking for advice on the choice of a tractor
Needed for 20 acres, grazing fields at present so able to cut grass with options for using front loading bucket etc.
May need to bale hay but I think the balers will be out of my price range at the moment.
Any suggestions on makes/models going...
Written by Justin Roberts from Agriland
While LAMMA may not be on the scale of Agritechnica, it does bring a taste of the continental shows to the UK, with the focus being on machines more suited to farming here than on the continent.
Held at the National Exhibition Centre (NEC) in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.