My Cvx 230 is my ploughing/Trio tractor and after just 2700hrs the Michelin Mach bibs are down to 20% mainly because in life before me it dragged a 21t digger around at 35psi.
Anyways 650/75 r38
Michelin £3900
Vredstein £2700
BKT £1375
Front 600/65 r38 have similar pricing.
Am I going to be...
On a 40k tractor, they mostly do more than 40k but lets assume it does 40k on the dot, if its running 650/65r38, if that was changed to 650/65r42 what would the difference in top speed be?
Have a 2010 5470 with suspended font axle, that does this bang when 4wd disengages - not sure if it’s coming from front axle, rear diff or somewhere else.
Feels like massive torque wind-up in the drivetrain and worse when a load on / at speed and in 2wd then brake (4wd comes on) lift foot off...
Evening,
Does anyone know the required rim size for the tyre 520/85/38. Been told 15x38 then one says 18x38. Not sure which is the one needed for these size tyres.
Thanks
What would be a good pressure to run 650/85 r38 at for general work ? Ploughing/cultivations/grass work ?
Not looking to be constantly adjusting pressures tho !
Got some 255/65R18 on a truck but they are just goodyear wrangler road tyre which are rubbish off road. Thinking about putting some all terrain type on. Any suggestions?
Needing to replace all tyres on our 6480. It has 650/65 38, 540/65 28.
It does a lot of road work and find it's a bit light when grip is needed off road.
Was thinking about 620/70 38?
What does others have?
The book doesn't list the tyres it left the factory with!
Has anyone had a new tractor on these tyres recently?
We got one on these and they're really strange looking the tread is very narrow just barely 600mm across but the sidewalls are bulged away out from the rim and the treads .
It was next to a 8 month old tractor at the dealer on the same...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.