Anyone

[Baler]

Class 250 roto cut nett problems,nett keeps feeding into bale chamber when it is cut clean any solutions thanks

 

[Alwaysinit]

No experience of a Claas but are you sure its cut clean and not even a thread left?
Try a new knife or reverse it if possible and go from there.

 

[startinghandle]

First I have never used a round baler...
But when we were farming and making round bales sometimes there would be problems, I remember the guy saying f@$king hell the net is a f12king nuisance sometimes ...if he changed net it would be ok and returned the bad net to supplier or sometimes the bad net would be ok in
another baler it would be ok

 

[Classichay]

Net brake isn’t working totally.

 

[Agrostar]

Used to happen to the two 255s I used drive. What used to work for us was either dropping the revs and netting the bale slower or putting a course carpet between the roll of net and base where the roll sits to create more friction so the roll stops spinning faster giving the knife a better chance of cutting it clean with no hairs hanging down to catch when the next bale is forming