Case Mxm 140

[Shane s]

I have recently bought a case mxm 140 2003 and looking help to get a few annoying things sorted out.

First of all when you let the handbrake down she beeps for a few minutes, its very annoying does anybody know what this may be and how to sort it?

Also the fuel guage on the dash isnt working, its just showing minimum all the time, im not sure what the problem of this might be, also this might be what is causing the beeping

the speed on the dash doesnt work also, normally it shows 0mph but sometimes shows a random speed, im guessing this is a sensor, however im not sure

finally the buttons on the mudguard dont work for the pto, is there a switch you need to turn on inside to alloy these to work, or are they simple done/a broken wire.

Thanks in advance for any feedback

 

[Wellytrack]

I’m sure I haven’t been the only one thinking it, and I don’t want to be an arse @Shane s but could the vendor straighten those issues out - even if paid to, in part or full?

 

[KennyO]

@Shane s I think the beeping will be the handbrake switch or the seat sensor.

If you remove the rubber gator on the handbrake there is a small switch which senses where the lever is up or down. It may be broken.

This will probably be why the outside pto switches aren't working too. I think the handbrake needs to be on for them to work and no-one in the seat.

Does it beep if you get off the seat without putting handbrake on? If it does not I think this would point to the seat sensor. Think you remove the seat cushion to get to it.

 

[Shane s]

@Shane s I think the beeping will be the handbrake switch or the seat sensor.

If you remove the rubber gator on the handbrake there is a small switch which senses where the lever is up or down. It may be broken.

This will probably be why the outside pto switches aren't working too. I think the handbrake needs to be on for them to work and no-one in the seat.

Does it beep if you get off the seat without putting handbrake on? If it does not I think this would point to the seat sensor. Think you remove the seat cushion to get to it.

The beeping stops when you pull the handbrake up however t it doesnt beep if you get of the seat and the handbrake down so ill look into getting that sensor. Thanks

 

[SilliamWhale]

My speedo on an mxm is the same. Very intermittitent. Need to sort it