Claas Atos error code

[onthehoof]

Occasionally get error code T64 and tractor won’t move, switch off and on again and it’s fine, any ideas??

 

[njneer]

Clutch pedal sensor.
Look across the pedals and make sure the clutch pedal is not higher than the brake pedals.
The rubber stop gets squashed and the pedal
Comes up higher than it has been calibrated and sensor goes out of range.
13 mm spanner loosen their jam nut and screw the stop down a bit till pedals level.
if it’s level to start with might just need calibrated ( dealer) or new sensor ( dealer as needs calibrated).

 

[Claas act]

Topping fields no problem earlier, warning light comes on and M 89 on the panel, everything still works just beeping away, any ideas folks? Machine is a Claas Atos 350 2017

 

[2jags]

@Claas act
Water Level in Fuel Filter Too High

Remove the Water Present in the Fuel Filter

Regards @2jags