Clipex fencing

Discussion in 'Buildings & Infrastructure' started by Forever Fendt, Sep 1, 2016.

  1. Forever Fendt

    Forever Fendt Member

    Location:
    Derbyshire
    we need about 900 meters of the above fencing,sheep net and 2 strands or barb i don't need the strainers ,where would be the cheapest to buy this from and has anybody had any recent prices thanks
     
  2. tepapa

    tepapa Member

    Location:
    North Wales
    Mc veigh parker are the suppliers of clipex so that's your first port of call.
     
    Brisel likes this.
  3. biggles

    biggles Member

    Location:
    derbyshire
    did you get a price @Forever Fendt as im thinking of putting something similar up in the spring. cheers
     
  4. kverneland es 80

    Location:
    cork
  5. Forever Fendt

    Forever Fendt Member

    Location:
    Derbyshire
    yes have a price for clipex getting a price next week for a similar product and a sample post
     
  6. james ds

    james ds Member

    Location:
    leinster
    What is the similar product , I'm using a lot of Clipex and find it great . The only other steel post I've seen is staplelock but you have to staple on the wire .
     
  7. james ds

    james ds Member

    Location:
    leinster
    What strainers are you going to use.
     
  8. james ds

    james ds Member

    Location:
    leinster
  9. james ds

    james ds Member

    Location:
    leinster
    The picture is of a 500 mt fence like what you are looking for , we use the Xfence wire which adds a bit to the price but it's the best wire on the market. It wasn't a bad days work.
     
  10. S J H

    S J H Member

    Location:
    Bedfordshire
    Will tornado fit into the clipex? X knot seems expensive compared to torus
     
  11. tepapa

    tepapa Member

    Location:
    North Wales
    What makes x knot so good? Compared to others.
     
  12. S J H

    S J H Member

    Location:
    Bedfordshire
    @james ds sells it :whistle: and 150m worth can stand up vertical without posts.
     
  13. Forever Fendt

    Forever Fendt Member

    Location:
    Derbyshire
    thats the one but have not looked at any yet
     
  14. Forever Fendt

    Forever Fendt Member

    Location:
    Derbyshire
    I am thinking make them using 139mm tube
     
  15. james ds

    james ds Member

    Location:
    leinster
    Yes it can , the X knot means there is no hinge knots on the wire , the vertical wire is also high tensile , it's hard to explain but if you were to use Xfence wire you will not use any other brand again.
     
    Andy26 likes this.
  16. james ds

    james ds Member

    Location:
    leinster
    There a waste of time , a small square post with not enough ground grip or contact . And too slow connecting the wire ,
     
  17. S J H

    S J H Member

    Location:
    Bedfordshire
    I've used it and I didn't like it, I prefer torus,
     
  18. tepapa

    tepapa Member

    Location:
    North Wales
    So is it just the same as torus with different spacings and a different name?

    Not put tornado wire on clipex yet, but they either have a product or a knack to make it fit apparently.
     
    S J H and Post Driver like this.
  19. Post Driver

    Post Driver Member

    Location:
    South East
    Its a medium tensile, not a true HT :pompous:
     
  20. Forever Fendt

    Forever Fendt Member

    Location:
    Derbyshire
    how far are you putting the posts and are they the std post?
     

Share This Page