CNH screen unlocks for isobus drilling variable rate

[Matt77]

Anyone using an isobus drill on a pro 700 or intelliview screen, and doing variable rate? What unlock code was required for the screen please, is it just task controller unlock?? Do you just load the maps on to the screen and it talks to the drill no problem? I’ve got the maps on to the screen, that’s as far as I’ve got.

 

[SinisaB]

Anyone using an isobus drill on a pro 700 or intelliview screen, and doing variable rate? What unlock code was required for the screen please, is it just task controller unlock?? Do you just load the maps on to the screen and it talks to the drill no problem? I’ve got the maps on to the screen, that’s as far as I’ve got.

Yes, you'll need TC unlocked. To use VRA prescriptions, you have to convert maps known by display.

 

[Matt77]

Yes, you'll need TC unlocked. To use VRA prescriptions, you have to convert maps known by display.

Thanks, yep got the unlock lined up waiting, just need to get the isobus working

 

[GPS_Support_2014]

Yes, just a Task Controller unlock is needed. Enter the unlock code in the Toolbox > Activate screen on the display.
If the dealer is out to do that I’d recommend to get him to update the software to the latest and greatest version.

 

[GPS_Support_2014]

Which drill is it you’re using?

 

[Nearly]

@Drillman

 

[Matt77]

Which drill is it you’re using?

Mzuri drill, the software is being updated this weekend, once the drill talks I’ll get the unlock