Digger Upgrade

[Digester Man]

EX60 has fallen through, guy just rang to see he sold it to someone else yesterday!! So the search is back on FFS

Sounds good, there’s nothing wrong with the EX60.

Just curious; the machine you bid for isn’t on here is it -www.proctorplantsales.com .I suspect they’d give priority to dealer bids.

Don't think any of those machines were in the auction, def not the one I bid on anyway.

 

[Pond digger]

EX60 has fallen through, guy just rang to see he sold it to someone else yesterday!! So the search is back on FFS



Don't think any of those machines were in the auction, def not the one I bid on anyway.

Well I believe he’s a reputable dealer if there’s anything there you fancy.

 

[Thomas5060]

http://www.stephenrobinson.com/vehicles/?VehicleID=191
There’s one there. Although not sure how she would be with the long dipper and no blade. Rubber tracks let it down abit. As well as the price. Nice machine all the same

 

[335d]

http://www.kdplant.com/products/machines/

http://www.kdplant.com/stock/hitachi-ex60-5/

 

[335d]

https://www.donedeal.ie/view/20763156
Hitachi EX60 digger

 

[335d]

https://www.donedeal.ie/view/21599501
Hitachi ex60

 

[Digester Man]

Thanks for the suggestions, they have been online for some time now. I am pretty sure about what I’m after - mono boom, long dipper, blade and steel tracks. The search continues..

 

[Worm digger]

we have got a 2006 volvo EC135 BLC for sale but it may be bigger than you are looking for.

 

[kej81]

Thanks for the suggestions, they have been online for some time now. I am pretty sure about what I’m after - mono boom, long dipper, blade and steel tracks. The search continues..

Let me know if you find 2 !

 

[Digester Man]

Well the adventure has finally drawn to a close, looked at 11 diggers in total and had 2 bought and eventually ended up with this. 2007 Cat 308C CR, steel tracks with rubber blocks, blade, mono boom, long dipper, hydraulic quick hitch and on board refuelling pump. Got speaking to the previous owner who traded it in a couple of months ago and he assured me it was sold for no fault and never let him down. I wasn’t struck on the Compact Radius as I was worried it would make her nod a bit, but previous owner tells me she is very planted and now I’m actually quite taken with the short tail as could be handy in certain situations.

Only 1 problem is she tracks to the left after he fitted a new track motor, anyone know if this can be adjusted out? It’s worse on slow speed, not as bad on high speed

 

[Thomas5060]

Well the adventure has finally drawn to a close, looked at 11 diggers in total and had 2 bought and eventually ended up with this. 2007 Cat 308C CR, steel tracks with rubber blocks, blade, mono boom, long dipper, hydraulic quick hitch and on board refuelling pump. Got speaking to the previous owner who traded it in a couple of months ago and he assured me it was sold for no fault and never let him down. I wasn’t struck on the Compact Radius as I was worried it would make her nod a bit, but previous owner tells me she is very planted and now I’m actually quite taken with the short tail as could be handy in certain situations.

Only 1 problem is she tracks to the left after he fitted a new track motor, anyone know if this can be adjusted out? It’s worse on slow speed, not as bad on high speed

Health to enjoy, looks a tidy machine. The new track motor probably tracks at a different speed compared to the original. This happened when we put a new one on our 3 tonner, so we adjusted the track levers to compensate for it

 

[benny6910]

Well the adventure has finally drawn to a close, looked at 11 diggers in total and had 2 bought and eventually ended up with this. 2007 Cat 308C CR, steel tracks with rubber blocks, blade, mono boom, long dipper, hydraulic quick hitch and on board refuelling pump. Got speaking to the previous owner who traded it in a couple of months ago and he assured me it was sold for no fault and never let him down. I wasn’t struck on the Compact Radius as I was worried it would make her nod a bit, but previous owner tells me she is very planted and now I’m actually quite taken with the short tail as could be handy in certain situations.

Only 1 problem is she tracks to the left after he fitted a new track motor, anyone know if this can be adjusted out? It’s worse on slow speed, not as bad on high speed

My 307 pulls left a little when on high speed tracking, I’ve never bothered but the levers are adjustable I think.

 

[glasshouse]

Well the adventure has finally drawn to a close, looked at 11 diggers in total and had 2 bought and eventually ended up with this. 2007 Cat 308C CR, steel tracks with rubber blocks, blade, mono boom, long dipper, hydraulic quick hitch and on board refuelling pump. Got speaking to the previous owner who traded it in a couple of months ago and he assured me it was sold for no fault and never let him down. I wasn’t struck on the Compact Radius as I was worried it would make her nod a bit, but previous owner tells me she is very planted and now I’m actually quite taken with the short tail as could be handy in certain situations.

Only 1 problem is she tracks to the left after he fitted a new track motor, anyone know if this can be adjusted out? It’s worse on slow speed, not as bad on high speed

Is urold one for sale?

 

[Digester Man]

Is urold one for sale?

She’s already away, sold within 24hrs on DoneDeal!

 

[335d]

https://www.facebook.com/groups/152...25435/?sale_post_id=2307714532825435&sfnsn=mo

 

[Digester Man]

No lowloader? No problem.

 

[Half Pipe]

Have you mastered the art of unloading without loading bank!? Or do you just tip it off when you get to job!

 

[bobajob]

3.3t JCB 8032zts for sale here, if anyone is looking . Genuine digger with 2800 hours

 

[glasshouse]

3.3t JCB 8032zts for sale here, if anyone is looking . Genuine digger with 2800 hours

Price?

 

[Digester Man]

Have you mastered the art of unloading without loading bank!? Or do you just tip it off when you get to job!

Now that I know for sure she fits I am contemplating buying alloy ramps if they can be got for sensible money