Does anyone know how to set up float system on kv3128.

[Bigsingle]

Needing abit advice on how this system works has a plug and oil bottle, tried it but not cutting close enough to ground, shortened top link but still not right.

 

[DaveB]

https://www.kvgportal.com/W_global/Media/w/KV_Benelux/Old%20Manuals/Taarup/3124-28-32%20Ops%20Manual.pdf

 

[manfromhill]

The power connection on tractor goes to wee electric box shoul have a green light on if connected hard to see in bright sunlight the arrow at the back I think has to be pointing to a point if I can dig out manual somehow

 

[DaveB]

My answer is a link to the manual!

 

[manfromhill]

 

[Bigsingle]

Yes have to line up the arrow.

 

[Bigsingle]

Tried that mower today, worked OK wasn't impressed with the spread veins on it didn't make any difference. Cut pretty well, have to watch it on a steep field cut across at the ends when turning, it does run up nice and tractor drives it no bother but have to watch for over hang. Maybe get on better next time.

 

[Dave W]

Tried that mower today, worked OK wasn't impressed with the spread veins on it didn't make any difference. Cut pretty well, have to watch it on a steep field cut across at the ends when turning, it does run up nice and tractor drives it no bother but have to watch for over hang. Maybe get on better next time.

What are the conditioner tines like? If they don’t have a decent square edge then they won’t throw the grass properly for vanes to do their job

 

[DaveB]

Looking from behind, remove the left hand windrow gate and open the right hand one fully. lift the spreader right up. It does the best job in heavy crops.

 

[Bigsingle]

Probably the conditioners tunes are abit worn there plastic, l will open the gates up and see if that helps any.