Draughty gap

[Grassman]

Is there a ready made item for blocking gaps between steel wall cladding and concrete panels? Something like a prrshaped foam filler.

 

[Grassman]

Is there a ready made item for blocking gaps between steel wall cladding and concrete panels? Something like a prrshaped foam filler.

 

[chickens and wheat]

a careful squidge of spray foam could sort that, Use a gun not a single use can, much more controllable
mine has a big gap with a sloped flashing, Dont think its sealed though, my side sheets are perforated anyway to let drain drier air out

 

[Grassman]

a careful squidge of spray foam could sort that, Use a gun not a single use can, much more controllable
mine has a big gap with a sloped flashing, Dont think its sealed though, my side sheets are perforated anyway to let drain drier air out

Yes that is the last resort. I wanted it to be a bit posher

 

[johnb5555]

Quick search for roof ridge fillers found these.

 

[Nearly]

Yes that is the last resort. I wanted it to be a bit posher

https://www.ebay.co.uk/itm/Foam-fil...hash=item1a4280fa9b:m:m107vBpANCfjQVknRYKPKWg
Posh costs.

 

[Tinman Steels Ltd]

We can offer foam fillers to suit most profiles in either Polyethylene or Supeaseal all we need is the attached profile id filled in and we can match the fillers to suit.

 

[Mur Huwcun]

If the sheets are tight on the panel then a very small blob of foam up from outside in each of the box profile ridges?

Or some sand and cement on the top? The problem with packing between the timber perlin and panel wil be draught still coming up behind the timber in the profile ridges?

 

[ewald]

Unfortunately mice just love it! If in a drier think again

 

[Tinman Steels Ltd]

We've always had really good feedback that mice, rats and pigeons don't like the taste of our Supaseal foam fillers. PE fillers have been known to be eaten.

 

[ewald]

That’s useful to know - don’t know the one I used, ended up having to remove it

 

[Hesston4860s]

Is there a ready made item for blocking gaps between steel wall cladding and concrete panels? Something like a prrshaped foam filler.

Did one by filling gap with expanding foam a couple years ago, but looked awful. Would fitting a drip edge not block the gap off enough ?.

 

[7830AP]

Wife sent me to docs for some tablets but less Brussels sprouts helps

 

[BobGreen]

Is there a ready made item for blocking gaps between steel wall cladding and concrete panels? Something like a prrshaped foam filler.

Yes foam fillets will be available to match the profile. Just shaken screws slightly push in filler and tighten up

 

[Grassman]

Sure there was more posts than this

 

[Shutesy]

Sure there was more posts than this

All sorted now

 

[Grassman]

All sorted now

Thanks. I must of messed up!

 

[Shutesy]

Thanks. I must of messed up!

Not a problem, merging posts isn't to difficult as long as one or both are not pages long

 

[Thick Farmer]

Newspaper?

 

[Grassman]

Newspaper?

I suppose if it was the financial times that would pass as being a bit posher