Dumper wind-up

Lucy's dad

Member
Location
Angus
I have a 6 tonne barford dumper with 30% tyres. All fairly perished. One has a damaged side wall that is looking a bit iffy.
If I replace 1 or 2, what are the chances of winding up the driveline?
If one wheel slips then you come to a stop.
Trying to avoid major expense of 4 tyres.
 

Lucy's dad

Member
Location
Angus
Thanks for the help folks. I have a large stockpile to move 300m down a gravel track.
Have been looking for part worn 405/70x20 but seem overpriced compared to budget new ones.
 
I have a 6 tonne barford dumper with 30% tyres. All fairly perished. One has a damaged side wall that is looking a bit iffy.
If I replace 1 or 2, what are the chances of winding up the driveline?
If one wheel slips then you come to a stop.
Trying to avoid major expense of 4 tyres.
I would say if all tyres are perished and you renew 2 there is good chance
of perished tyre bursting
Does the dumper get used a lot?
 
Location
Suffolk
Mmm, perished tyre goes pop when loaded on a track. Walk back to find a jack that can handle the lift, plus a nice timber bearer that will help it not just press into the ground. Then undo the wheel nuts. Then get the puncture repaired from a not so local co......
I'm exhausted just thinking of saving all that money and taking all that time doing the repair. o_O
SS
 

Zetor

Member
Location
Northumberland
I have a 6 tonne barford dumper with 30% tyres. All fairly perished. One has a damaged side wall that is looking a bit iffy.
If I replace 1 or 2, what are the chances of winding up the driveline?
If one wheel slips then you come to a stop.
Trying to avoid major expense of 4 tyres.
Don't worry about a bit of wind up on a dumper, I have 4, & 2 of them have Miss matched tyres.
Is it an SX6000? If so it'll have JCB axles like my SX9000 which won't be stressed at all in a dumper that size.
I was given some bald tyres off a friends merlo handler
 

Lucy's dad

Member
Location
Angus
Don't worry about a bit of wind up on a dumper, I have 4, & 2 of them have Miss matched tyres.
Is it an SX6000? If so it'll have JCB axles like my SX9000 which won't be stressed at all in a dumper that size.
I was given some bald tyres off a friends merlo handler
Yes, a sxr6000.
 

Will you help clear snow?

  • yes

    Votes: 68 32.1%
  • no

    Votes: 144 67.9%

The London Palladium event “BPR Seminar”

  • 11,390
  • 170
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top