Electric fence problem

Harry2000

Member
Mixed Farmer
I have a Gallagher mb150 mains energiser on a 4 acre field and I’m getting 8000v where the live wire connects to the fence, but this then drops to nothing about halfway round. I’m using poly wire which isn’t the thickest 2mm at a guess and I haven’t joined the fence in a loop yet are these my two main issues . I presumed it wasn’t an earth problem as I’m getting the power in the fence at the start
 

czechmate

Member
Mixed Farmer
Just walk around with one of these and find where you loose the volts…


image.jpg
 

Paddington

Member
Location
Soggy Shropshire
I have two fence testers with LED displays both impossible to see on a sunny day, so two options, test at night or put a cowl over the meter. The cowl didn't really work until I tried sticking my head inside a black plastic sack like an old fashioned photographer. Worked better until the wind blew the sack across my downward line of vision and I walked into the fence. The fence was working. :inpain:
 
I am losing a lot of volts through new grass just now. I am putting another earth stake in this morning to see if that will help.
I find the electricity kills the vegetation off quite well, but if a section is switched off for a while allowing the grass to grow up too much it is often overwhelmed when it's switched back on until it gets it zapped back again.
For that reason I rarely ever switch sections of fence off.
 
Last edited:

Harry2000

Member
Mixed Farmer
Due to being new to electric fencing I’ve put it down to wire choice the poly wire I had has resistance of 10 ohms/m whereas the new stuff I’ve got is 0.03ohms/m and is thicker
 

Dry Rot

Member
Livestock Farmer
A lot of leakage through vegetation here. So I have the power distributed through the top wire, then take a lead off that for individual paddocks with stock in them. It's more work, but it does keep hill sheep in. Fed up with escapees. I hung a strip of scrap aluminium below one gate they were getting under with baler string, then attached a hot wire from the fence. That fixed 'em!
 

Henarar

Member
Livestock Farmer
Location
Somerset
Due to being new to electric fencing I’ve put it down to wire choice the poly wire I had has resistance of 10 ohms/m whereas the new stuff I’ve got is 0.03ohms/m and is thicker
some poly wire only has 3 strands of wire in it some has more also some is made differently so the wire sticks out of the plastic more so the animals are more likely to get a shock also the wire is not so tight so less likely to break
 

Harry2000

Member
Mixed Farmer
Has that solved your problem?
Will let you know when I get it on , it’s not come yet
How long?! I have fences miles long with polly wire
i think it was 1.6mm thick and it said it was suitable for short to medium fences and I have a 600m run of it but at about halfway the voltage drops right off but it has hight power at the start so I guess this is down to resistance in the wire
 

Will you help clear snow?

  • yes

    Votes: 68 32.2%
  • no

    Votes: 143 67.8%

The London Palladium event “BPR Seminar”

  • 8,962
  • 120
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top