Fendt isobus plug

[Richard Smyth]

i need an isobus fitted to the front of my fendt 927.

What options do I have. Fendt didn’t list it as an option when I bought it

 

[Robt]

Isobus vehicle harnesses are readily available in UK, so guess they should be in Oz.... They are heavy duty that go to battery with 60amp relay then to a rear socket and an in cab socket.

 

[Pheasant Surprise]

You should be able to get a front plug extension ISO harness, tap that into the existing loom (at a 4-pin Deutsch connector pair). Power as said direct from battery to power 60A and 25A circuits up to the new breakaway socket.

There’s probably one available as a Fendt spare. Here’s a Reichardt example;
http://www.reichhardt.com/ISO-FLEX-MODULE.html

 

[Richard Smyth]

You should be able to get a front plug extension ISO harness, tap that into the existing loom (at a 4-pin Deutsch connector pair). Power as said direct from battery to power 60A and 25A circuits up to the new breakaway socket.

There’s probably one available as a Fendt spare. Here’s a Reichardt example;
http://www.reichhardt.com/ISO-FLEX-MODULE.html

This is exactly what I was thinking. Just wasn’t sure if it would be this simple. I had thought of making a harness to tap into existing Isobus plug at rear and run forward with power direct from battery.

Probably somewhere on the harness closer to the front I could use

 

[Pheasant Surprise]

Can’t see a front socket harness on parts book, not to say it doesn’t exist though.

The Fendt rear cable kit, item 10 (H954970170061) is retail £197. I dont think that’s a complete kit though. Would need the relay, item 13 (H945970170022) @ £129 and breakaway socket, item 1 (H842970170010) @ £237 plus some fixings etc.

Lends a bit of colour to it perhaps.

 

[Richard Smyth]

I specifically asked for it when I bought it in 2015 and was told it wasnt an option.

I shall have a look around on agco parts shortly.

Do you get parts prices online in uk. I don’t but not sure if I need to enable it somehow

 

[Pheasant Surprise]

I specifically asked for it when I bought it in 2015 and was told it wasnt an option.

I shall have a look around on agco parts shortly.

Do you get parts prices online in uk. I don’t but not sure if I need to enable it somehow

Those prices I just looked up from Chandlers website. If I order through parts book it gets booked to the dealer, they call or email me with a quote.

 

[Pheasant Surprise]

Then there’s simple Y-cable adapters available too.

Never used one, but you’d be splitting power to the implements/controllers...

http://www.agexpress.com/webres/File/Catalog/pg33.pdf

 

[CORK]

I want to repaint the bracket for the isobus socket on the back of this fendt?

what’s the best way to dismantle the socket so I can remove it?

 

[Wombat]

That doesn’t look like an isobus plug

 

[CORK]

That doesn’t look like an isobus plug

Oh right lol, it’s some kind of plug, I’d just like to separate it from the bracket so I can get it shot blasted.

Im not going to use a big snips before anyone suggests it!!

 

[Wombat]

I think it’s an abs socket and the centre with all the wires comes out as a unit

 

[Matt77]

ABS is it not? Wouldn't have a clue how it comes apart though

 

[CORK]

I think it’s an abs socket and the centre with all the wires comes out as a unit

ABS? Very fancy! , I actually see the isobus socket up above it. I’ve never used either.