Fendt Varioguide and field marking

[shakalakka]

Hi,

On the varioguide terminal, is it possible to mark worked area based on say the «go» button? So that i only mark the map when i click «go» and enable varioguide, drop the implement and so on. Also stop marking on «end».

 

[Boysground]

Don’t think you can’t turn it on and off just by pressing the button. The tractor needs to be doing something. So implement going down or auto steer activating. Perhaps your best bet is to set it to mark with spool activation and set one of them on a timer for 1 second.

Bg

 

[Deerefarmer]

Yes. You can set up your go and end functions to engage autosteer.

In trigger settings touch the soft key with the steering wheel on it. Will only paint on your screen with auto steer engaged.

Is that what you mean?

 

[Boysground]

I thought the OP wanted to just turn the marking on without the tractor actually doing a specific operation at the same time.

Bg

 

[shakalakka]

i just want to mark on something else then just driving. As default, the field will be marked by the implement width just by driving over it. I would like the marking to only happen at some specific trigger - like dropping the drill, or enable autosteer. This will help a lot when drilling, easier to see what have been worked but thanks guys, ill check the trigger section!

 

[Boysground]

This is the page you want

With the uni press here I have it set so that coverage starts when auto steer is activated

Bg

 

[shakalakka]

Thanks, no need to change anything under map settings in addition to this red squared button?

 

[Boysground]

Set it like my photo just choose which switch you want to turn it on. If it’s a spool select which one. Then it should work a treat

Bg

 

[shakalakka]

Thanks a bunch - as usual this is forum knows all

 

[shakalakka]

Sorry to hijack my own thread here @Boysground , but do you know how to lock a certain contour segment? I found a video, but must be older software

 

[Boysground]

Press spanner at top of screen

select contour segment

bg

 

[shakalakka]

As always much appreciated!