Fit out existing shed - ideas ?

[JohnB_4]

Have a shed that has previously been used as an indoor silage pit, it's attached to a cubicle shed, was looking to use for cattle instead. Maybe a large bedded pen with a calf creep and a calving pen ? It's 71 foot long and 28 foot wide. Drawing attached, any ideas welcome.

 

[JohnB_4]

 

[M-J-G]

Is the shed stand alone, or are there other buildings adjoining it?

 

[JohnB_4]

The shed and cubicle shed are all-in-one. Nothing adjoining.

 

[livestock 1]

Feed barrier at the front, bedded area at the back, water trough keep it simple. Bedding will last longer this way as they shite more where they eat. We have a few sheds set up like this.

 

[topground]

Split it to have two narrow pens fed up the middle. Orkney floor 1:12 fall running back from the feed barriers to cut out bedding costs for young stock.

 

[M-J-G]

The shed and cubicle shed are all-in-one. Nothing adjoining.

Open up one side to feed silage along, scrape feed stand area to the slats and bed the back

 

[JohnB_4]

Don't have room either side to open up and use for feeding from the front.

 

[M-J-G]

Can you make any other doors into the shed?