Ford 10 series stopper

[paul mcerlean]

Hi, would anyone have a picture or parts diagram for the connection of the stopper cable to the engine. I can’t seem to source the part that the end of the cable attaches to. It is a series 2, 7610.
Thanks in advance

 

[Vincent]

 

[yellowbelly]

 

[agrimax]

It's not an independant part,ie it's part of the stop control lever on the pump.
You would probably get something here if you want to keep it close to or as original.

Diesel Injection Pumps - Seal Repair Kits - Spare Parts - BOSCH - DELPHI

Suppliers of spare parts and seal repair kits - Buy in our online shop - Bosch - Siemens - Lucas - CAV - Delphi - Denso - Zexel for diesel injector pumps.

injectionpumps.co.uk

 

[yellowbelly]

Hi, would anyone have a picture or parts diagram for the connection of the stopper cable to the engine. I can’t seem to source the part that the end of the cable attaches to. It is a series 2, 7610.
Thanks in advance

If you a can't get fitted up, I think we have a couple of old Simms Minimec pumps somewhere.

That arm clamps onto splines on the fuel shut off rod IIRC.

 

[agrimax]

Or just drill a hole through a bolt,put it through the hole in the lever and clamp the cable in the drilled hole between two nuts.