Hi,
I'm trying to re wire the dual power up on a tractor with a new switch,
Can I just run a 12v supply to a rocker switch then to the solenoid or am I missing something? As there is only one wire going to the DP solenoid, but pop the switch off the dash and there is about 4 wires connected to it?
Thanks for any help
I'm trying to re wire the dual power up on a tractor with a new switch,
Can I just run a 12v supply to a rocker switch then to the solenoid or am I missing something? As there is only one wire going to the DP solenoid, but pop the switch off the dash and there is about 4 wires connected to it?
Thanks for any help