ScottRussell
Member
When i open crystal this message comes up every time, it never used to do this, does anyone elses do this?
Fullwood crystal
- Thread starter ScottRussell
- Start date
ScottRussell
Member
This message
- Location
- Buxton Derbyshire
Yes I get the same when I open Crystal up after restarting the computer. Ignore it.
Hi,
This happens when an unknown EID tag is identified in the parlour, and the milker enters an animal ID (brand) into the corresponding keypad. It was originally designed for situations where no previous animal records exist electronically - in these situations, the process would be as follows:
You can see this list by viewing Browse>Add animals
You can then review the animals as shown below
You must enter a value for I&R number. You can remove incorrect entries with the "-ve" button and quickly add a batch with the "+ve" button. Removing all enteries and the clicking "Apply" will clear the warning when you start Crystal. Until next time...
This happens when an unknown EID tag is identified in the parlour, and the milker enters an animal ID (brand) into the corresponding keypad. It was originally designed for situations where no previous animal records exist electronically - in these situations, the process would be as follows:
- Apply an EID tag without recording it or the animal number.
- When the animal next enters the parlour 4 zeroes (6 for very modern systems) would appear on the corresponding meter as animal ID. The farmer would then enter the brand number on this point.
- Crystal would link the tag and the meter-entered brand number & store in a temporary location
- The farmer would review and accept this information, at which point those records become permanent in the main Crystal database.
You can see this list by viewing Browse>Add animals
You can then review the animals as shown below
You must enter a value for I&R number. You can remove incorrect entries with the "-ve" button and quickly add a batch with the "+ve" button. Removing all enteries and the clicking "Apply" will clear the warning when you start Crystal. Until next time...
ScottRussell
Member
Thanks [emoji106], i deleted a animal by mistake where can i find this button to restore the animal, it said what to do one the help page can't see the undo button in archiveHi,
This happens when an unknown EID tag is identified in the parlour, and the milker enters an animal ID (brand) into the corresponding keypad. It was originally designed for situations where no previous animal records exist electronically - in these situations, the process would be as follows:
- Apply an EID tag without recording it or the animal number.
- When the animal next enters the parlour 4 zeroes (6 for very modern systems) would appear on the corresponding meter as animal ID. The farmer would then enter the brand number on this point.
- Crystal would link the tag and the meter-entered brand number & store in a temporary location
- The farmer would review and accept this information, at which point those records become permanent in the main Crystal database.
You can see this list by viewing Browse>Add animals
You can then review the animals as shown below
You must enter a value for I&R number. You can remove incorrect entries with the "-ve" button and quickly add a batch with the "+ve" button. Removing all enteries and the clicking "Apply" will clear the warning when you start Crystal. Until next time...
- Location
- Herefordshire
File (top left)
open
archive
Find animal and should say restore
borrom right of the deleted cows Base page
open
archive
Find animal and should say restore
borrom right of the deleted cows Base page
ScottRussell
Member
Yeah thanks, but the problem was a problem with the icon it wasnt their where it should be it was missing, it turns out it was a problem with one of the files on crystal had the sortware tech man have a look at it tonight, he got the cow restored now the icon is back missing again, bit of a strange one
Scoobyscotlad
Member
Does everyone else clear log files every so often on Crystal?
Nope
ScottRussell
Member
All sorted now
- Location
- North Norfolk
From Crystal help
many thanks for sharing this. it is still not what i am after . i wont to be able to extract data from the system as csv, excel or text formatFrom Crystal help
- Location
- North Norfolk
If the data you want is available in a report, then the instructions show you how to get it as a CSV or text. If you want something not available as a report, If you go into Reports/Report definition there is a big selection of reports available. If what you want is not available as a report, then you will have to go into reverse engineering the backup files, which will not be easy!
Foregoneconclusion
Member
- Location
- Pembrokeshire
Hello. Anyone aware of this program being replaced.
It is a dinosaur . It talks to nothing.. I have been using it for over 10 years and still think it is garbage..
It is a dinosaur . It talks to nothing.. I have been using it for over 10 years and still think it is garbage..
- Location
- Herefordshire
Yes fullsense but it costs a lot to change by the sounds of it! Anybody using it it? Uniform and crystal talk quite well on most things.
Foregoneconclusion
Member
- Location
- Pembrokeshire
You using Uniform n crystal?