Grass seed collector.

[renewablejohn]

Any budding fabricators around the Lancashire area fancy making one of these.

http://www.kimseed.com.au/Seed Harv... Front End Loader Brush Harvester 05-2016.pdf

I already have a front mounted brush driven by pto that could be modified.

 

[Henarar]

Did you get anywhere with this @renewablejohn

 

[renewablejohn]

Unfortunately not. I still have the brush to do it just lacking any fabricators willing to take onboard a project.

 

[Henarar]

I can't get the link to work but you would need a hopper with a vent on the top to let the air out I presume

 

[renewablejohn]

I can't get the link to work but you would need a hopper with a vent on the top to let the air out I presume

No. If you can imagine an old style flail harvester like a browns but replaced the flail with a cylinder brush like you use for sweeping concrete then you have a grass seed harvester. Just need something like the old corn sacks to blow the seeds into or collect in a hopper or trailer.

 

[Gordy1]

Like to see it but I can’t get the link up either

 

[mobileweld]

As above, would like to see the machine you talk about but link doesn’t work

 

[renewablejohn]

Like to see it but I can’t get the link up either

Not surpised the link was done 3 years ago

 

[Gordy1]

Not surpised the link was done 3 years ago

That will teach me to look when a post was posted

 

[JackoTS90]

https://kimseed.com.au/Seed%20Harvesting/Kimseed%201.5%20&%202m%20Front%20End%20Loader%20Brush%20Harvester%2005-2016.pdf

Try that