Grease gun adapters

[jf78]

As the title says, I'm looking for a grease gun adapter kit (90 degree elbow, extension hose etc, etc )
Was just wondering what the best for farm use would be? I've seen some that look nasty and not so cheap and some that look good but awful expensive

 

[nick...]

Get a box full of assorted ones on amazone.makes life a bit easier.got a genuine jcb one for doing axle cv joints on telehandler.a lot easier than plain grease gun.that is 90 degree but very expensive
Nick...

 

[Niall310]

https://www.amazon.co.uk/Manual-Gre...1529873747&sr=8-1&keywords=grease+gun+adapter

is this the one you would recommend @nick... ?
I never knew there were adaptors until reading this thread!

 

[nick...]

Yes that sort of thing.there are lots of differant sorts.just replaced all my grease gun ends as they all leaked when under pressure.about 6 quid for 6.sorted now.all from amazon
Nick...

 

[seedman stains]

The new best tool to have after g coupler ,torque amplifier,hammer , mole grips and stiltsons

 

[ACEngineering]

https://www.amazon.co.uk/Manual-Gre...1529873747&sr=8-1&keywords=grease+gun+adapter

is this the one you would recommend @nick... ?
I never knew there were adaptors until reading this thread!

I have that kit and its totally useless. Its all too fat and bulky to get in anywere. The ony bit i use is the small needle nozzle the rest is useless.

 

[john432]

the 90 degree fitting? Anyone used one? Can be had for some £12

 

[Grassman]

the 90 degree fitting? Anyone used one? Can be had for some £12

A 90 degree coupling came with my milwaukee battery grease gun. I use it a lot more than I expected. Very handy.

 

[David.]

As useful as anything are the plunger type guns that came with for eg. Grimme machinery, they have a very small nipple coupling and a thin tube to it, get in lots of places that 4 jaw chuck wont.