Ruston3w
Member
- Location
- south suffolk
Hi, I am re-discing a GB discopak which has the same 2 disc bearing/ spindle assemblies as a discordon and would like to replace the seals, bearings are OK. The problem is it turns out this machine has had the expensive GB units replaced with after- market ones, round spindle not square, steel housing not 2 piece casting. Does anyone recognise/ remember such a thing? I suppose likely to have come from France rather than made here maybe.
The seals in question are a fancy 2 piece design with 3mm or so of compression rather like old fashioned bellows seals. 60mmx90mmx13.5mm when compressed.
Thanks, Richard.
The seals in question are a fancy 2 piece design with 3mm or so of compression rather like old fashioned bellows seals. 60mmx90mmx13.5mm when compressed.
Thanks, Richard.
