Hardi Auto Section Control

[fenrat]

Hi there, looking into section control on the Hardi Commander sprayers with the electric nozzle shutoffs.
As it is the sprayer has an HC6500 controller with 6 sections. However I think the 6500 can handle up to 13 sections according to a manual I found. Is there a way of using Trimble section control to switch more than 6 sections on the sprayer. I assume the controller and the jobcom box on the sprayer will be the same hardware for 13 or 6 sections. Ideally I would like individual nozzle control, however I'm assuming that the can controller on the sprayer "jobcom box" cant handle 48 sections. Is there any way of retrofitting a can controller which could handle 48 sections to the sprayer without disrupting the rest of the HC6500/6400 features. TIA Richard

 

[Slick]

Trimble section control will control however many sections the jobcom controller is set up for.
Or you could fit Trimble's FieldIQ system to control up to 48 sections.
Or you could fit Trimble's FieldIQ ISOBUS controller to control up to 128 sections.
I'm not sure how the bottom two options would impact the HC6500/6400's other features though.