Hardi nozzle pressure guage

[dannewhouse]

Can I get a pressure guage to try on each boom section.
Had sprayer SCS tested last year we struggled to get 1 boom section up to pressure but sorted on the day, was a fault on valve not travelling far enough, anyway opposite side looks to be overdosing so I'd like to check.
Can I get a nozzle that's threaded and buy a seperate guage to screw in
Cheers

 

[Ormond]

What's it reading on the gauge when just that section is switched on?

 

[dannewhouse]

Never tried tbh.
Is that the way to set it up?
Do each section individual to bang on 3 bar and keep checking when the whole boom is on its still at 3 bar?

 

[Ormond]

There's the compensator valves on each section to alter to balance it all up

 

[dannewhouse]

I thought you used them to set it but the opposite way ie nock say lh boom off and alter lh compensation valve till rest is back at 3 bar?

 

[Bobthebuilder]

just need a normal pressure gauge with a short piece of pipe attached to a nozzle cap with hose tail