Hydraulic ram supplier

[Big_D]

Can anyone recommend a supplier of a single acting 2 stage ram for a tipping trailer please. If it helps, cylinder bore is 80mm, holes are 26mm, closed length 1040mm, extended length, 2670mm. Difference is 1630mm in 2 stages.....does that mean I want an 800mm stroke??

 

[Bobthebuilder]

Flowfit https://www.flowfitonline.com/

 

[Big_D]

Flowfit https://www.flowfitonline.com/

Thanks, already had a look there but they don't seem to do cylinders that large

 

[startinghandle]

There is supplier of hydraulic rams with large stocks somewhere in Scotland but I don't know name

 

[Bobthebuilder]

stewart trailers

 

[Thomas]

There is supplier of hydraulic rams with large stocks somewhere in Scotland but I don't know name

White House Products

 

[Richy12]

Hendry hydraulic cylinders?

 

[ORRA LOON]

Welcome to Hendry Hydraulic Cylinders - Hendry Hydraulic Cylinders

 

[milkloss]

Just in the process of buying two new rams for the strimech grab...... they're cheaper than a seal kit for the originals!

 

[Stewartry hill]

Norri King at Ramerscales lochmaben does repairs on rams not too dear

 

[deere 6600]

Howford hydraulics

 

[Andrew]

Poweram Hydraulics, Huntingdon

Steerforth

Flowfit

 

[TheTallGuy]

Thanks, already had a look there but they don't seem to do cylinders that large

Give them a call as they might be able to do a custom build.

Another option is https://hydraulicmegastore.com/ again it's likely to be a custom build

 

[Big_D]

Just in the process of buying two new rams for the strimech grab...... they're cheaper than a seal kit for the originals!

Bizarre isn't it!

 

[Big_D]

Norri King at Ramerscales lochmaben does repairs on rams not too dear

Thanks, had a couple sets of seals but no time before it's leaking again

 

[Big_D]

Give them a call as they might be able to do a custom build.

Another option is https://hydraulicmegastore.com/ again it's likely to be a custom build

Called flowfit but they only do single stage rams unfortunately

 

[Big_D]

Thanks all, rang Whitehouse products this morning, no problem give us your email we'll send a spec sheet to fill in and the workshop will make it up for you 2 hrs later no email, rang back to check they had my email right, still nothing guy at hendrys very helpful, can't do me one identical so would need to buy a new pair which is a bit annoying but looking like best option

 

[Stewartry hill]

Thanks, had a couple sets of seals but no time before it's leaking again

he will.build a new ram

 

[timmyboy]

Hutton Legg might be worth a call @Big_D . Brian is usually straight on the ball with most trailer parts. If not I'm sure he will know someone who would be. 01728663010

 

[stroller]

I've had some fluid power rams in the past, but the rods have pitted with rust fairly quickly.