JCB 8014 Digger

[patrickr321]

Hi

Anyone own a JCB 8014, could help me with a query on fuel filter. I want to change the fuel filter and something's confusing me:

Here's the instruction manual page:

View attachment 1123122

Here's a picture of my filter which looks like the diagram above. I'm expecting the filter I need to change to be the central section of the filter


View attachment 1123123

....but: here's what's available as a part (using the part number 32/925666)

View attachment 1123124

It looks like this is the sedimenter section, not the middle section.

Anyone come across this? Or anyone know a good JCB parts supplier who might be able to help me with this.....

Thanks

 

[L P]

Yes that's the right part, sedimenter screws to the bottom where drain plug is. Easier to remove sediment bowl before you take filter off fyi, top ring is only 1/3 turn to remove, then filter drops down.

 

[L P]

Another tip, put sediment bowl on new filter and fill filter with diesel before putting it on, much easier to bleed

 

[patrickr321]

Thanks for your replies! I'll buy the part. Now the question: OEM or genuine?

 

[Tractortech]

Now Then.
I have a genuine filter on my digger.
I'd get the O-ring that fits between the sediment bowl and the filter too...

 

[L P]

Now Then.
I have a genuine filter on my digger.
I'd get the O-ring that fits between the sediment bowl and the filter too...

Think they come with o ring. No filter is genuine, jcb don't make filters. Fram one would be just the same

 

[L P]

Thanks for your replies! I'll buy the part. Now the question: OEM or genuine?

No such thing as genuine