JCB Rims

[Andyrob]

Hi guys,

Can anyone help me out please with a query

Does anyone have the size of the rim for JCB loadal and pivot steer 5 stud

Centre bore, pcd and any other details

Finding it hard to get the info back that I need

 

[KB6930]

Pivot steer are different offset due to different axles it's not a lot but are different to a rigid telehandler

 

[Andyrob]

Pivot steer are different offset due to different axles it's not a lot but are different to a rigid telehandler

Yea im trying to get the different offsets of them which seems impossible

 

[KB6930]

We've got 1 of each I can measure the pivot later on tonight but I won't see the rigid till the end of the week

 

[Andyrob]

We've got 1 of each I can measure the pivot later on tonight but I won't see the rigid till the end of the week

thank you

 

[wold-topper]

not sure if this might help

JCB 15 x 28 Wheel Rims

JCB 15x28 Wheel Rims Details to follow, brand new, £450 per set

jrfirby.co.uk

 

[KB6930]

The above rims will be off a rigid we used to run 28 inch on 2 previous 536.60 .

I went to measure our pivot last night but had no tape measure and I couldn't see any numbers stamped on the outside but it was dark . Unfortunately it's away to another farm loading muck so will be a few days before I see it again

 

[milkloss]

I've got a rim off our tm310 here. Wheel nuts got loose and ate the countersink so we replaced. For sale or I can measure it for you if you like.

 

[Andyrob]

I've got a rim off our tm310 here. Wheel nuts got loose and ate the countersink so we replaced. For sale or I can measure it for you if you like.

yea please

its the offsets im after trying to make something work on two machines that a fella is trying to buy

 

[KB6930]

Wheels off a pivot on a rigid will make it wider. We were gonna swap ours to do the silage clamp with the pivot with the good tyres off the rigid but didn't bother they will fit each as we asked the dealer. I think it's 1.5 inch wider each rim but that was rough measurements

 

[KB6930]

Finally!!

First and second pic 310 8 inches from counter sunk side to outside

Third and fourth 536.60 6.5 inch from counter sunk to outside

 

[Andyrob]

Finally!!

First and second pic 310 8 inches from counter sunk side to outside

Third and fourth 536.60 6.5 inch from counter sunk to outside

you sir are a gentleman!!

 

[KB6930]

Only took a week to get them and me in the same yard!!

What I didn't do was measure if they were the same wheel base overall the tm310s looks as if it sits wider but could just be the way it looks .