JD3200 loadall steering ram seals

[Hummin-Cummins]

Hi does anyone have a good source (better than main dealers ridiculous price) for steering ram seals on a JD3200 loadall please?

TIA
H-C

 

[Barleymow]

usually numbers on most seals

 

[startinghandle]

HES at Gloucester

 

[ACEngineering]

Hi does anyone have a good source (better than main dealers ridiculous price) for steering ram seals on a JD3200 loadall please?

TIA
H-C

If it's a zd axle I cant help.

If it's a Dana axle they are about £90 plus vat from manitou?

I got a front steer ram on order for a jd3215 at minute. JD have 2 in stock but want £3500!

I'm getting 1 of dana about £750ish but factory have no stock and lead time of 110 days?‍

 

[SteveO]

@ACEngineering mate can you check your email and PM, I have sent you messages and got no response. Thanks

 

[ACEngineering]

@ACEngineering mate can you check your email and PM, I have sent you messages and got no response. Thanks

Sorry I been out on site all day. Not seen any email though unless there in my junk folder?

 

[ACEngineering]

@ACEngineering mate can you check your email and PM, I have sent you messages and got no response. Thanks

Definitely no email?‍ got no phone signal to listen to messages at minute.

Is it is a Dana axle I got a seal kit in stock.

 

[SteveO]

Maybe went to spam but I have sent you before on that mail. Also PM here if you can check from Friday Thanks

 

[Tractortech]

Now Then..
A JD3200 telehandler will have ZF axles in it. Z63721 seal kit looks to retail at £297.... I would think if you're on good terms with your dealer, you could get it for around £200..

 

[Tractortech]

If it's a zd axle I cant help.

If it's a Dana axle they are about £90 plus vat from manitou?

I got a front steer ram on order for a jd3215 at minute. JD have 2 in stock but want £3500!

I'm getting 1 of dana about £750ish but factory have no stock and lead time of 110 days?‍

An AZ62495 front steering ram for a ZF axle machine retails at £2462,61 and yes, there's 2 in stock.. I would think if you're on good terms, £1800 would buy it..

 

[ACEngineering]

An AZ62495 front steering ram for a ZF axle machine retails at £2462,61 and yes, there's 2 in stock.. I would think if you're on good terms, £1800 would buy it..

i'm not on a ZF axle though My customer is a 3215 with dana axles. i dont know JD price cause i didnt ask it was my customer told me, he might have been quoted ZF rams by JD dealer of cause if they got it wrong!

 

[Tractortech]

i'm not on a ZF axle though My customer is a 3215 with dana axles. i dont know JD price cause i didnt ask it was my customer told me, he might have been quoted ZF rams by JD dealer of cause if they got it wrong!

Hmmmmm,,,, £3229,42 and 8 in stock, again, good terms and £2200 should buy it..

 

[ACEngineering]

Hmmmmm,,,, £3229,42 and 8 in stock, again, good terms and £2200 should buy it..

Customers going to wait. It's only about £750 retail from Dana!

 

[ACEngineering]

Hmmmmm,,,, £3229,42 and 8 in stock, again, good terms and £2200 should buy it..
[/QUOTE

Hell I quoted someone a whole brand new dana axle complete with steer ram for a manitou couple days ago and only £4250 plus vat delivered!? that looks very cheap now?

 

[Tomtrac]

Heky thump
Why a new ram if chrome is pitted get a new chrome made for your old ram
Is there no old type engineers nr you who make them or put new chromes in guy up here could make new chrome or seals for near a quarter off them prices
Where you at
our man is nr j 36 off m6
But shure there must be a man who does lathing and rams near you go to a plant hire place they could tell you

 

[ACEngineering]

Heky thump
Why a new ram if chrome is pitted get a new chrome made for your old ram
Is there no old type engineers nr you who make them or put new chromes in guy up here could make new chrome or seals for near a quarter off them prices
Where you at
our man is nr j 36 off m6
But shure there must be a man who does lathing and rams near you go to a plant hire place they could tell you

Rods fine, theres a deep score in the tube/bore. Its a double ended ram with a flange on the out side to bolt it in. wouldn't be easy to make one.

I have a very good local place for rams, but not practical to make this one. And although a manitou ram is similar the outlets for the pipes are in the wrong places.

 

[Tomtrac]

Rods fine, theres a deep score in the tube/bore. Its a double ended ram with a flange on the out side to bolt it in. wouldn't be easy to make one.

I have a very good local place for rams, but not practical to make this one. And although a manitou ram is similar the outlets for the pipes are in the wrong places.

Could you not just move the outlets
Dont take this the wrong way but i am amazed at the money people are prepared to pay to keep all these expensive machines going. And to say these poor ag dealers dont make any money
Thinking back my dad happen said the same thing wen i was 20-30 when spending 65+k on a new 320 horse selfpropeld and 30k on a 130 hp tractor lol
I dont think they gave anywhere nr the trouble these new one do tho
Getting older now if you cannot mend it in t workshop dont buy it now policy

 

[ACEngineering]

Could you not just move the outlets
Dont take this the wrong way but i am amazed at the money people are prepared to pay to keep all these expensive machines going. And to say these poor ag dealers dont make any money
Thinking back my dad happen said the same thing wen i was 20-30 when spending 65+k on a new 320 horse selfpropeld and 30k on a 130 hp tractor lol
I dont think they gave anywhere nr the trouble these new one do tho
Getting older now if you cannot mend it in t workshop dont buy it now policy

Why would i want to move the outlets? the correct ram from dana is cheaper and customer is happy to wait! Agreed if the only option was a JD ram at 3k plus one would be making more of an effort to come up with a alternative.

 

[Tomtrac]

Just above it mentioned manitue ram similer but outlets in wrong place

 

[ACEngineering]

Just above it mentioned manitue ram similer but outlets in wrong place

Yes but it's still more money. ?‍