paul&mandy
Member
- Location
- surrey/west sussex
Keeping flashing up fuel temperature is high and to clean debris etc. Rads are all clean. Dealer suggested change the sensor that I've ordered in.
Anyone else this?
Anyone else this?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Im not sure it has a heater.Does your tractor have a fuel heater installed??
Check the fuel temperature on the screen first thing in the morning, check it against some other sensors, they should all be the same until you start it.
Also, try the fuel temperature with a infrared thermometer next to the fuel sensor..
Ah yes, load the parts cannon, don't worry about a diagnosis, just blast away until its fixedKeeping flashing up fuel temperature is high and to clean debris etc. Rads are all clean. Dealer suggested change the sensor that I've ordered in.
Anyone else this?
No as it's not come up with a filter blocked message. Bit should have tried it I suppose...Did it to ours changed filters and that solved it.
I've put the new sensor on but have not used the tractor due to a breakdown on the new hedger. Luckily wife's tractor and hedger are free this week to jump on.@paul&mandy Did you fix it?
I’m not sure but I think the fuel runs through a cooler, however when the filter is starting to block it is diverted so it doesn’t go through the cooler to keep the pressure down and flow up.No way of checking fuel temperature on screen I can find. It's behaved all morning today, new sensor being dropped off later, hopefully that will fix it if not I've got a fitter out next week for another job anyway.
No as it's not come up with a filter blocked message. Bit should have tried it I suppose...
Saying that a friend who gets the same order of fuel as we buy bulk together is having issues with blocked filters yesterday.