Recently had a Gen 5 and 7000 receiver installed on an 8345R and started to try it for the first time today with our anhydrous applicator with Deere rate controller and cannot get it to record or paint coverage. The applicator has a height switch on the rear hitch but the display only shows “auto” as an option. I can do everything but get it to paint. I can set guidance lines and apply product and the rate controller counts acres and amount applied, just no coverage map. Everything worked fine a couple of weeks ago when the old 2630 display was still in the tractor.
John Deere Gen 5 display not mapping
- Thread starter jonjac
- Start date
H.Jackson
Member
- Location
- West Sussex
Sou.ds like it's recognised the rate controller so must be a setting in that that needs changing if 2630 was using height switch before. At least it recognises machine mine won't see the 750A as the new software is incompatible with kvernland software!
The London Palladium event “BPR Seminar”
This is our next step following the London rally 
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
lwtheatres.co.uk
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
BPR Summit | LW Theatres
lwtheatres.co.uk