Metering unit has stopped working. Don’t know why. It has come up a few times the past few weeks but only momentarily. Now it’s permanent and we can’t do anything.
there is various tests you can do in one of the menus i think
checking resistance with the motor is one of them
Poss best ring a dealer up & have a word with a mechanic there
Is the metering unit free, could be overloading the motor or jammed. I’m not to familiar with the Kuhn setup but could try sliding the motor off and see if it will turn without load, also make sure the meter turns free.
As said though check all the connections, I had a faulty motor controller on my system but that was faulty out the box.
Must systems if you put 12V to the motor it should spin flat out.
Yes! Quite simple in the end. The main connection cable going into the back of the control box in the cab just needed a bit of electrical cleaner and a good clean round all the little prongs. Not had the problem since.
Location: Village Hotel Bury, Rochdale Road, Bury, BL9 7BQ
The Farming Forum has teamed up with the award winning hardware manufacturer Easy Compute to bring you an educational talk about how AI and blockchain technology is helping farmers to diversify their land.
Over the past 7 years, Easy Compute have been working with farmers, agricultural businesses, and renewable energy farms all across the UK to help turn leftover space into mini data centres. With...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.