Kuhn spinner running through mf field star 5 screen

[Lofty1984]

As above non isobus machine currently running section control through Trimble cfx 750 screen just wondering if anyone is using it through the field star screen

 

[Speedstar]

As above non isobus machine currently running section control through Trimble cfx 750 screen just wondering if anyone is using it through the field star screen

On what model on tractor

 

[Lofty1984]

At the moment it’s used on the 7618 but looking to use it on one of the 7720’s through the field star screen the spinner is a kuhn 40.2 m-emc-w

 

[Richard Smyth]

Don’t believe it will work. It would have to be a isobus spreader.

 

[Lofty1984]

Don’t believe it will work. It would have to be a isobus spreader.

That’s what we are thinking too

 

[Robt]

It won’t work, it communicates to Trimble via serial. The mf screen is isobus and doesn’t have serial control to third party option.
Ask Kuhn if you can fit an isolink control module to the Kuhn spreader to make it isobus . You can on some makes

 

[Lofty1984]

It won’t work, it communicates to Trimble via serial. The mf screen is isobus and doesn’t have serial control to third party option.
Ask Kuhn if you can fit an isolink control module to the Kuhn spreader to make it isobus . You can on some makes

Cheers Rob the spinner is only a year old so hopefully something can be done

 

[Richard Smyth]

I would be talking with these guys in holland or find a dealer near you. The smart control module would do it I think.

https://www.homburg-holland.com/uploads/brochures/SmartSOLUTIONS_ENG_DEF_Zonder_snijttekens.pdf