M9540 Kubota Seat

[Matt6195m]

We Have a Kubota M9540 . Just wondering if anyone has had any issue with the compessor not working. Whether it would be a wire of Fuse etc

 

[tweedale terrier]

What make of seat do they use. If it’s a grammer it will probably be wires broken

 

[H200GT]

As above wires under seat, had to repair dads once. Simple fix

 

[Matt6195m]

If I get a multimeter reader will that tell me there's power through the wires

 

[H200GT]

There will only be 2 wires. Its usually obvious to spot the damage. Take the plastic clips off that hold the curtain onto the bottom of the seat frame, lift up.

From memory they may also be visable to the rear of the seat. If you put tiems behind the seat, the damage could more than likley be there as opposed to under the seat itself

 

[TripleSix]

If I get a multimeter reader will that tell me there's power through the wires

A 12v test light as probably better for your purposes.

Check you've power to the plug that supplies the seat, could be a fuse.

Most likely it's a wire broken under the seat as others have said.

It's obvious generally because the wire is cut in half.

 

[Thomas Scott Seating Ltd]

Hi,

Its usually a GRAMMER MSG75 low profile air seat fitted, it may be an issue with the seat switch at the front. Check there is power going to the compressor, if so, then you can buy the compressor seperately