Salopian1
New Member
- Location
- Shrewsbury
Hi
Have a Manitou 730-120 powershift 02 reg that has a problem whenever it is in 4th or 5th gear in that it keeps blowing the fuse (F8) and looses drive. It doesn't happen straight away but maybe after about a minute in those gears, it is not a problem in any of the other gears.
Local dealer has been out and checked everything like the solenoids, forward/reverse lever, speed sensor, etc even tried a new powershift gear lever and thinks it could be the controller / ecu / black box mounted under the beam against the cab.
Unfortunately Manitou no longer stock or supply the black box so thought I would ask anyone on here if they had any ideas where I could get one from?
Looking into getting the box sent away to be repaired but could be unlikely and we're not 100% that the box is the problem.
Unfortunately there's no machine in the dealers yard that is similar to ours to even just swap just to try it at the minute.
Any ideas??
Have a Manitou 730-120 powershift 02 reg that has a problem whenever it is in 4th or 5th gear in that it keeps blowing the fuse (F8) and looses drive. It doesn't happen straight away but maybe after about a minute in those gears, it is not a problem in any of the other gears.
Local dealer has been out and checked everything like the solenoids, forward/reverse lever, speed sensor, etc even tried a new powershift gear lever and thinks it could be the controller / ecu / black box mounted under the beam against the cab.
Unfortunately Manitou no longer stock or supply the black box so thought I would ask anyone on here if they had any ideas where I could get one from?
Looking into getting the box sent away to be repaired but could be unlikely and we're not 100% that the box is the problem.
Unfortunately there's no machine in the dealers yard that is similar to ours to even just swap just to try it at the minute.
Any ideas??